Don't Choose The Wrong Machine: Wood Pelletizer With Feed Pelletiser, and Wood Extruder With Charcoal Extruder

The visual appearance alone can sometimes be unbelievable. Two things can visually appear the same or very similar but turn out to be different. This often happens in the production of wood pellets and wood briquettes (pini kay briquette / uncarbonised briquette). And what's worse, this machine is the heart of the industrial production process, namely the pelletiser in the wood pellet industry and the extruder in the wood briquette industry (pini kay briquette / uncarbonised briquette). So that errors in selecting the machine can also have fatal consequences, namely not only is the production target not achieved, even the product in question is not successfully produced. This is why the buyer or user of the machine must be careful about the machine that will be purchased and used.

In the wood pellet industry, mistakes often occur, namely pelletisers are used for animal feed but are used for wood pellets. As a result, wood pellets may not be formed at all because the power for feed pelletisers is much smaller compared to pelletisers for wood or wood pellet production. Offers of cheap prices often make buyers or users tempted and do not look further, so that as a result they will be disappointed.

Likewise in the wood briquette industry (pini kay briquette / uncarbonised briquette). Wood extruders also have much larger motors than charcoal extruders. Briquettes produced with a wood extruder apart from not requiring additional adhesive are also denser and harder due to the use of a high-powered motor. The mistake that can occur is that a charcoal extruder is used for a wood extruder and this also usually happens because the price is cheaper. The briquettes produced from the wood extruder can then also be made into charcoal, producing the final product in the form of charcoal briquettes. Although charcoal briquette production using a charcoal extruder will also produce this product, the process route and product quality are different. Below is the route for the charcoal briquette production process.

The raw material used in route 1 is wood dust such as sawdust which is then pressed or compacted with a wood extruder. With strong pressure and high heat, no additional adhesive is needed, but lignin, which is a natural polymer found in wood, acts as an adhesive. The resulting briquettes can then be charcoaled in a carbonization furnace and the final product is charcoal briquettes. Meanwhile, in route 2, the raw materials are charcoaled or carbonized first, then the charcoal is mixed with adhesive, usually starch and pressed or compacted using a charcoal extruder. The use of additional adhesive is because in charcoal, lignin has been decomposed in the previous carbonization or carbonization process. The final product produced is charcoal briquettes. The quality of the charcoal briquettes in the route 1 process is better than the route 2 process because apart from being denser so the burning time is longer as well as the heat produced.

So, in order not to make the wrong choice, buyer / user have to be careful and precise about the specifications of the machine, as well as knowing the raw materials and production process and don't be easily tempted by offers of cheap prices. The greater the production capacity, the greater the need for pelletiser and extruder equipment, so that if the wrong choice occurs, the risk is fatal, because these machines are expensive. It is also important to note that the equipment purchased also comes from a manufacturer that has been tested so that it has reliable performance.