Wood Chip Production Waste for Wood Pellet or Wood Briquette Production

The production of wood chips as biomass fuel in cofiring of PLN's (Indonesia's state-owned electricity company) coal powerplants has been increasingly popular lately. Wood chip production is the easiest biomass fuel production compared to various biomass fuel products currently produced by the industry. The availability of raw materials is the main factor in the sustainability of production. The calorific value of wood chips depends on the species or type of wood used and its dryness level (water content). Hardwoods and low water content are ideal products for wood chips. And because it has a low bulk density of around 250 - 350 kg / m3, the transportation factor is another aspect that is very important for the delivery of wood chip products.

The particle size of wood chips has also been determined so that handling and storage are easier. To obtain the desired particle size of wood chips, screening is carried out after the wood trunk or pieces are chopped with a wood chipper machine. With these prerequisites, there are products that are rejected from the production process, namely wood chip products that are too large (oversize) and products that are too small (undersize). Products that are too large (oversize) can be returned to the chipper machine to be chopped again, but wood chip products with particle sizes that are too small (undersize) must be used for other things so that in addition to zero waste wood chip production, it can also provide additional income for the wood chip producer.

Small particle sizes such as sawdust from wood chip waste production can be used for the production of wood pellets or wood briquettes (pini kay briquettes). And even wood briquettes are more tolerant of slightly larger particle sizes because wood briquette products have a higher density than wood pellets, in addition wood briquettes can also be further processed into charcoal briquettes (sawdust charcoal briquettes). Wood briquettes themselves are commonly used in countries with four seasons, especially in winter for home heating. While charcoal briquettes (sawdust charcoal briquettes) are commonly used for BBQ, especially for Middle Eastern countries and Turkiye.

In the production of wood chips, it is estimated that biomass waste that is approximately the size of sawdust is around 20-25%, meaning that if wood chip production reaches 5,000 tons/month, the waste is around 1,000 - 1,250 tons/month. This is sufficient for the production of wood briquettes and sawdust charcoal briquettes. Meanwhile, if you want to produce wood pellets, especially for the export market, usually a production capacity of around 5,000 - 10,000 tons/month is needed. Of course, this cannot be done. In addition, the investment in equipment for the production of wood briquettes, sawdust charcoal briquettes and even wood pellets for this purpose is also much larger than the production of wood chips. This makes it more reasonable if the production of wood briquettes or sawdust charcoal briquettes is carried out by other parties. The other party will process the wood chip factory waste into wood briquettes, charcoal briquettes (sawdust charcoal briquettes) and because the complexity of production and equipment costs are also higher, it is natural that the profits obtained from processing this waste are also higher.

The world price of wood pellets, like palm kernel shells (PKS), has fluctuated a lot, and lately the price has tended to be low. Palm kernel shells (PKS) themselves are biomass fuels that are competitors of wood pellets in the global market but are cheaper because they come from one of the solid wastes of palm oil mills that are processed simply. With these conditions, coupled with the fact that it is very difficult to obtain adequate volumes of waste from wood chip factories, the production of wood briquettes (pini kay briquettes) or charcoal briquettes (sawdust chracoal briquettes) becomes a rational choice. In addition, the stable price of the two products makes it even more attractive to consider them.

Production of Pini Kay Briquette from Plywood and Veneer Factory Waste

Indonesia's plywood production is estimated at more than 10 million cubic meters each year, which is produced from hundreds of plywood factories, even Indonesia once dominated the world wood industry in the period 1980 to 1995. The existence of plywood factories in Indonesia has actually been around for a long time, but its development only became apparent after in 1972. After the period 1980-85 the number of factories increased rapidly. At that time there were no less than 110 medium to large scale factories in almost all provinces in Indonesia. There are five provinces as the largest plywood producers in Indonesia, namely East Java, East Kalimantan, Central Java, South Kalimantan and West Kalimantan. And six other provinces that are starting to develop are Banten, Papua, Central Kalimantan, South Sulawesi, Riau and Jambi. Most of the plywood is for the export market.

APKINDO (Indonesian Wood Panel Association) is a forum for plywood and veneer industry players. When APKINDO was formed on February 12, 1976, it was initiated by 13 plywood companies, while currently it has members from more than 125 industries spread throughout Indonesia. APKINDO aims to foster unity and togetherness and voice the interests of the plywood industry to utilize logs more efficiently, absorb more labor and increase added value. APKINDO's role continues to this day, one of which is to support the SVLK policy which is believed to be able to restore the positive image of Indonesian forestry in the eyes of the world, so that it will make it easier for Indonesian wood products, especially plywood, to win competition in the global market. 

The volume of wood waste in the plywood industry is quite large, reaching almost 55% or more than 5 million tons per year of national plywood production. The potential for this waste is quite large and has great potential to be processed into pini kay briquette (wood briquette screw type). Why should have to process it into pini kay briquette (wood briquette screw type)? Pini kay briquette is the choice for the solution to the plywood waste problem because apart from the production process being easier, the machine investment is also cheaper. This is because plywood factory wood waste is already dry so it does not require a drying process. Apart from being quite expensive, the dryer also have operational costs. It is also very possible to obtain high quality due to the low ash content, because the wood for plywood production has been debarked so that the content can be reduced to below 1%.

Veneer is a thin sheet of board used to make plywood. The veneers are arranged and glued together, in odd quantities, so that they become plywood. Many veneer manufacturers do not have plywood manufacturing units, but in general plywood factories have veneer production units. Veneers can be made by peeling (rotary cutting), slicing, sawing and sharpening. Indonesian veneer production is currently quite large as is the waste it produces. This waste will also have great added value by processing it into pini kay briquettes, just like the plywood waste above.

The pini kay briquette production process can use the plywood and veneer industry waste mentioned above. Before being compressed into pinikay briquettes in a briquette machine or screw press, the waste needs to be uniform in size to the size of sawdust and also have a dryness level of around 10%. Wood waste that is large in size needs to be reduced in size first and the dryness level also needs to be tried to reach the 10% range. With a screw press / extruder, wood biomass from these wastes can be compacted (densified) up to 1400 kg/m3 or much denser than wood pellets which are around 700 kg/m3. The pini kay briquette product can then be cut into certain sizes and ready to be marketed, especially for the export market. The need for pini kay briquettes is mainly as space heating fuel. Furthermore, this pini kay briquette can also be further processed into charcoal briquettes or commonly called sawdust charcoal briquettes. With this density, the burning time for briquetted charcoal is twice that of ordinary charcoal or more. Meanwhile, the main use of charcoal briquette is for barbeque.

For the plywood and veneer industry which produces up to thousands of tonnes of woody biomass waste every month, potentially becoming an environmental problem, the production of pini kay briquette could be an effective solution. And if there is a plywood and veneer industry that is interested in producing pini kay briquettes, we are ready to help the market.

Don't Choose The Wrong Machine: Wood Pelletizer With Feed Pelletiser, and Wood Extruder With Charcoal Extruder

The visual appearance alone can sometimes be unbelievable. Two things can visually appear the same or very similar but turn out to be different. This often happens in the production of wood pellets and wood briquettes (pini kay briquette / uncarbonised briquette). And what's worse, this machine is the heart of the industrial production process, namely the pelletiser in the wood pellet industry and the extruder in the wood briquette industry (pini kay briquette / uncarbonised briquette). So that errors in selecting the machine can also have fatal consequences, namely not only is the production target not achieved, even the product in question is not successfully produced. This is why the buyer or user of the machine must be careful about the machine that will be purchased and used.

In the wood pellet industry, mistakes often occur, namely pelletisers are used for animal feed but are used for wood pellets. As a result, wood pellets may not be formed at all because the power for feed pelletisers is much smaller compared to pelletisers for wood or wood pellet production. Offers of cheap prices often make buyers or users tempted and do not look further, so that as a result they will be disappointed.

Likewise in the wood briquette industry (pini kay briquette / uncarbonised briquette). Wood extruders also have much larger motors than charcoal extruders. Briquettes produced with a wood extruder apart from not requiring additional adhesive are also denser and harder due to the use of a high-powered motor. The mistake that can occur is that a charcoal extruder is used for a wood extruder and this also usually happens because the price is cheaper. The briquettes produced from the wood extruder can then also be made into charcoal, producing the final product in the form of charcoal briquettes. Although charcoal briquette production using a charcoal extruder will also produce this product, the process route and product quality are different. Below is the route for the charcoal briquette production process.

The raw material used in route 1 is wood dust such as sawdust which is then pressed or compacted with a wood extruder. With strong pressure and high heat, no additional adhesive is needed, but lignin, which is a natural polymer found in wood, acts as an adhesive. The resulting briquettes can then be charcoaled in a carbonization furnace and the final product is charcoal briquettes. Meanwhile, in route 2, the raw materials are charcoaled or carbonized first, then the charcoal is mixed with adhesive, usually starch and pressed or compacted using a charcoal extruder. The use of additional adhesive is because in charcoal, lignin has been decomposed in the previous carbonization or carbonization process. The final product produced is charcoal briquettes. The quality of the charcoal briquettes in the route 1 process is better than the route 2 process because apart from being denser so the burning time is longer as well as the heat produced.

So, in order not to make the wrong choice, buyer / user have to be careful and precise about the specifications of the machine, as well as knowing the raw materials and production process and don't be easily tempted by offers of cheap prices. The greater the production capacity, the greater the need for pelletiser and extruder equipment, so that if the wrong choice occurs, the risk is fatal, because these machines are expensive. It is also important to note that the equipment purchased also comes from a manufacturer that has been tested so that it has reliable performance.

Dichotomy of Energy Plantation and Legumes Plantation

There is a dichotomy between friends in livestock and forestry today about these legumes. From animal husbandry, they see leaves as a source of feed protein from plants and from forestry, they see wood as a source of wood that is easy to cultivate with high productivity. In the forestry sector, the wood is usually used as a renewable energy source such as wood chips, wood pellets, wood briquettes or charcoal briquettes. Forestry grows thousands of hectares of these legumes such as gliricidia with a wood orientation while the leaves are considered a by-product or waste from their plantation side. By utilizing the wood and leaves, it means getting out of this dichotomy, creating a new paradigm and being able to overcome food and energy problems or optimize the legume plantation or energy plantation (whole tree utilization) of thousands of hectares.

In addition to functioning as a legume plantation for animal feed, especially ruminants (sheep, goats, cattle, buffalo), as well as biomass fuel as above, the same plantation can also be used as a raw material for synthetic fiber board, for more details, please read here . Meanwhile, as the bioeconomic era is getting closer, the need for bioenergy, especially wood pellets, is increasing, the need for animal feed, especially ruminants which is part of the chain of human food needs is also increasing and indeed the growth of the earth's population is also increasing, and the need for biomaterials such as synthetic boards is also increasing. Therefore, the establishment of energy plantations or legume plantations or biomass plantations is very important, strategic and multi-beneficial. Based on these conditions, it is not impossible that in the near future the plantation will become a national and even global trend.

Utilization of Marginal Land and Former Coal Mines for Ruminant Livestock and Charcoal Briquette Production

Photo is taken from here

The extent of marginal land including critical land and unused land which reaches more than 6 million hectares as well as ex-coal mining land which is estimated to reach 8 million hectares are environmental problems that must be overcome. Turning these lands back into productive land so that apart from preventing a bigger environmental disaster, it also provides other benefits for human life. One solution to this problem is to plant the land with pioneer plants of the leguminoceae group whose roots firmly grip the soil and are in symbiosis with azetobacter so that it fertilizes the soil such as calliandra and gliricidia as well as its leaves as a source of animal feed, flowers for honey production, and the wood for the production of charcoal briquettes. Or in other words, the establishment of the plantation besides having environmental benefits as an effort for conservation and land reclamation along with water conservation, of course, also provides benefits for ruminant livestock or the production of animal feed and the production of charcoal briquettes. Ruminant farms, namely sheep, goats and cattle, are very suitable to be developed using the leaves of the plantation. The combination with charcoal briquettes, namely by using the wood, is an ideal combination or integration. In a number of countries the charcoal briquettes are used as fuel for grilling BBQ from lamb, goat and beef. So in addition to all parts of the tree can be utilized also even the final product of livestock in the form of meat and wood processing so that it becomes charcoal briquettes also meet again. An interesting and unique blend or integration.

The need for red meat, namely lamb, goat and beef in the country itself is still lacking, so it requires an adequate supply. In terms of goat and lamb meat, the need for the Jabodetabek (Jakarta, Bogor, Depok, Tangerang and Bekasi) area alone has not been met, so it is supplied alternately from East Java, Central Java and Lampung alternately. In addition, according to Aspaqin (Association of Indonesian Aqiqah Entrepreneurs) there has been an imbalance in the supply of sheep and goats due to the large number of female productive sheep and goats being slaughtered. This condition causes the sustainability of the supply of sheep and goats to be disrupted. According to data from Aspaqin that they collected, 63% of female sheep and goats were slaughtered from a total of 331,693 slaughtered tails. Of course there are still many who are not recorded because there are still many aqiqah entrepreneurs who are not members of the Aspaqin. In addition, there are also many stalls for eating goat dishes, such as satay stalls which still slaughter productive sheep and female goats. Aspaqin continues to strive for education and socialization to improve these conditions, including a proposal to provide punishment for the slaughter of these productive females.

Meanwhile, in the beef cattle sector, Indonesia has the advantage of fattening cattle (feedlot). With the availability of a lot of agricultural wastes and agro-industrial wastes in Indonesia, this business is very competitive, even indonesia is the best. Moreover, this is by creating a plantation that is specifically designed for the feed source by utilizing land that can be said to be unproductive at first. By only taking about 100-120 days, the fattening was successful or completed, although in general, breeder or seed cattle are generally still imported from Australia. Australia, especially northern Australia is the center of the seed cattle. With the vast grazing area there, the cost of producing feeder cattle is very competitive and cannot be done well in Indonesia. Although there are a number of discourses to produce seed cattle in eastern Indonesia and palm oil plantations, the facts are still not or are still very minimal. In addition, according to Gapuspindo (Indonesian Beef Cattle Farmers Association), the domestic demand for beef has not been met or there is still a shortage of around 60% and this shortage is filled by imports of buffalo meat from India. Buffalo meat from India actually has to be sold cheaper than beef, but in fact it is the same as beef. This condition is getting worse, especially in the period leading up to the Eid al-Fitr holiday with lots of illegal meat circulating, such as wild boar meat.

Charcoal briquettes are a product of wood processing from the plantation. The production of charcoal briquettes using wood raw materials must also be managed properly so that it can be sustainable. The important thing to note is that the harvest of wood for the production of charcoal briquettes should not exceed the production of wood from the plantation itself, for example the need for wood for the production of briquettes is 1000 tons / month, the speed of wood production from the plantation is at least the same as the wood harvested every month. Charcoal briquette production techniques are also available in 2 options or routes such as the scheme below. However, route 1, which is briquetting before carbonization, is more in demand because the quality of the briquettes produced is better. In this route, the wood biomass raw material has been downsized so that the particle size is suitable for the production of the briquettes and the dryness level has also been adjusted and then briquetted or pressed in a briquette machine without using additional adhesive. The briquette product is then carbonized so that it becomes the final product in the form of charcoal briquettes or commonly known as sawdust charcoal briquette.

 

Photo is taken from here

In addition to domestic consumption, sheep and goats are also export commodities to a number of countries. Information obtained from the Ministry of Agriculture's Pusdatin (Centre of datas and informations) that Indonesian sheep and goats have been exported, among others, to Malaysia and the United Arab Emirates (UAE). Basically, the choice to do sheep and goat export business is the choice of the breeders or farmers  themself and the specifications for the export market are also different for local needs. If the local market generally uses sheep and goats weighing 25-35 kg per head, the export market generally requires a weight above 35 kg per head. For example, for a large market for sheep and goats, Saudi Arabia, especially during the hajj season, reaches around 2 million heads or a quarter of the country's needs, which means it reaches 8 million heads per year.

And lastly, basically the need for food, especially animal protein and more specifically from ruminants sheep, goats and cattle will continue to increase along with the increase in the population itself. The world population is estimated to reach 10 billion in 2050 or 1.3 times today and Indonesia's population will reach 319 million in 2045 or 1.2 times from today. Another thing that deserves attention is Indonesia's demographic bonus. The demographic bonus with the dominance of the productive young generation should be a separate strength for the Indonesian nation if it is supported and directed properly. This sector is certainly one solution. With the vast land area in Indonesia that can be used for this business, God willing, it will overcome various important problems today such as food security, preventing environmental damage, creating jobs, improving living standards, improving food quality and so on.     

Charcoal Production from Coconut Fiber Waste

Coconut coir is waste from coconuts or coconut processing industry that is still not widely used. Coconut coir is usually left on the coconut plantations and often only becomes waste that pollutes the environment such as in the Indragiri Hilir area, the center of the largest coconut plantation in the world. This is similar to the empty fruit bunches in the palm oil industry which are usually only thrown in palm oil plantations or just piled up around the palm oil mills. In a number of palm oil mills, fiber (mesocarp fiber) is also widely produced and also tends to be waste that pollutes the environment, especially in the palm oil mills with high efficiency boilers. A number of coconut coir has been processed into cocofiber and cocopeat (or if empty fruit bunches of palm oil are processed into dried long fiber) but the percentage is still small. Cocofiber is used for mattresses, upholstery, ropes, brooms, doormats, geotextiles and so on, while cocopeat is used for growing media.

Another practical and easy use even in remote areas is the use of coconut coir waste for charcoal production. The charcoal is then made into briquettes so that it is denser and easier to use. Charcoal briquettes can be used to grill meat, fish or cooking fuel for various foods. The charcoal briquette fuel should be attractive and preferred because it has no odor, is not smoky and has a uniform shape. Compared to coal briquettes that were once promoted, charcoal briquettes from coconut coir and biomass are generally more suitable for barbecue and cooking purposes for the reasons above, whereas in coal briquettes in addition to the unpleasant odor arising from sulfur compounds, The ash produced is also included in the hazardous group so that it needs more difficult handling. These remote areas can use charcoal briquettes for daily cooking purposes or be marketed to cities, especially in culinary shops that provide food to be baked or burned (barbecue).

Another use of charcoal from coconut coir is for the agricultural sector. That is because charcoal (biochar) can be used to increase crop productivity and efficient use of fertilizers. Biochar can be used in vegetable and fruit gardens. Coconut plantations are generally very rarely or never fertilized so in an effort to increase productivity so that the optimal fertilization program needs to be done regularly. If the average productivity of Indonesian coconuts is currently only 40 grains / trees / year, it is expected that the use of biochar can be increased. Whereas the maximum average number, especially the types of coconut (tall varieties) can reach 100 to 120 grains per tree per year or about three times what is currently available.