Palm oil mills produce a large amount of biomass waste, and one of the largest in their daily operations is empty fruit bunches (EFB). Comprising approximately 22% of the fresh fruit bunches (FFB) processed by the mill, the volume becomes enormous and piles up daily if not managed properly. For example, a palm oil mill with a capacity of processing 60 tons of FFB per hour for 20 hours per day produces 264 tons of empty fruit bunch waste per day (approximately 6,600 tons per month and 79,200 tons per year). This enormous amount would resemble a hill if piled up in one place.
Incinerators have recently become popular, particularly in Indonesia, for processing empty fruit bunches due to their speed and practicality. Furthermore, the ash produced by burning them can be used as fertilizer due to their high potassium content. However, these incinerators produce exhaust emissions that pollute the environment, including black smoke and particulate matter. These emissions, which pollute the environment and exceed the threshold permitted by the Ministry of Environment (KLH), have led to the prohibition of incinerators. This ban has led to an increasing number of unmanaged empty fruit bunches. Using empty fruit bunches for mulch is also less effective, and composting, a biological process, takes a long time.
Video link for conventional EFB incinerator here
This problem demands an immediate and effective solution. The quickest practical solution is to upgrade the incinerator to make it environmentally friendly or to reduce emissions below the required threshold. This can be achieved by using adequate emission control devices to meet these environmental requirements. While many emission control devices are available, cost and target output are crucial considerations when selecting them. This approach not only addresses the problem of empty fruit bunches, but the resulting ash can also be used as a potassium fertilizer.
Furthermore, by upgrading the incinerator with emission controls (basic type), the equipment can be developed into several types, as follows: the second type is a cogeneration boiler for palm oil mills, allowing 100% palm kernel shell (PKS) to be sold, even for export. The third type is by adding a new boiler and steam turbine for electricity production, which is then sold to PLN (Indonesia State Owned Electricity Company) under a power purchase agreement (PPA). The fourth type is equipped with waste heat recovery equipment, allowing for more general use. This also means the combustion process in the upgraded incinerator can also be upgraded so that the combustion process can run optimally. Several combustion technologies, such as chain grates, step grates, or reciprocating grates, can be considered to achieve maximum performance, including the removal and handling of ash product.
Empty fruit bunches (EFB) processing can vary, although the primary focus is addressing environmental pollution caused by them. However, their large volumes certainly represent a potential raw material for processing units. Therefore, in addition to addressing this waste, the technology used must also provide financial benefits. Of the numerous EFB processing technology options, the cost-to-benefit ratio of a technology application will be a crucial consideration for EFB processing.
In addition to combustion using conventional or this upgraded incinerator, thermal processing routes also include pyrolysis, with slow pyrolysis specifically for biochar production and fast pyrolysis for bio-oil production. Another pyrolysis variant is mild pyrolysis or torrefaction for the production of torrified biomass. Then there's gasification to maximize gas (syngas) production from biomass. Furthermore, empty fruit bunches of palm oil can be used as fuel or an energy source. To facilitate handling, storage, and reduce transportation costs, empty fruit bunches need to undergo biomass densification technology, with the final product being pellets or briquettes.
No comments:
Post a Comment