Showing posts with label global pellet market. Show all posts
Showing posts with label global pellet market. Show all posts

Saturday, October 4, 2014

Global wood pellet demand to reach 50 million metric tons by 2024

By RISI | September 04, 2014
Global wood pellet demand is rapidly expanding as consumers, businesses and regulators look for alternatives to fossil fuels. Globally, wood pellet demand is projected to grow from an estimated 23 million metric tons in 2014 to 50 million metric tons in 2024. These and other key findings were released in a new study by RISI, the leading information provider for the global forest products industry.

"It's a really exciting time to be looking at the wood pellet market. We're seeing strong demand in the European heating sector as high energy prices drive consumers to look for fuel alternatives. Also, policies that promote the generation of renewable energy are spurring the use of pellets as a substitution for coal in power plants," said Seth Walker, author and bioenergy economist at RISI.
"Additionally, Korea and Japan are beginning to enter the market, creating a greater impact on global trade flows. Right now we're getting a small taste of what the market is going to look like in 10 years," continued Walker.

Global Pellet Demand Outlook Study analyzes and forecasts growing wood pellet markets through 2024 by region. This study focuses on the European industrial market, European heating market, North American heating market, and Asian industrial market.
Global Pellet Demand Outlook Study provides forecasts for:
- European Industrial Markets—Including Belgium, Denmark, the Netherlands, Sweden and the United Kingdom
- European Heating Markets—Including Austria, Denmark, France, Germany, Italy and Sweden
- Asian Industrial Markets—Korea and Japan
- North American Markets—The United States and Canada
Industrial users analyzed in this study include: Dong Energy, Drax, E.ON, GDF Suez, KEPCO subsidiaries, Ontario Power Generation, RWE, and Showa Shell
For more information on this study is available here.

Source of article : http://www.biomassmagazine.com/articles/10883/global-wood-pellet-demand-to-reach-50-million-metric-tons-by-2024 

Sunday, May 25, 2014

Optimization The Pelletiser Perfomance



Carpet is a thin layer of material that is pressed, which are at the peak of the die surface. When the incoming raw materials into pelletiser it will be driven by the roller and forming carpet. The more materials put into pelletiser it will further add to the carpet. Carpet is then pressed into the die holes and produce pellets. So for material that can form a pellet, initially to be able to form a carpet.

All wood pellet production is a matter of reducing energy requirements and the degree of wear of equipment while simultaneously improving quality and productivity of the pellets. This is why the production of quality pellets require special skills. Setting between roller and die with a certain distance which is called the roller gap that is essential for the above purpose. Characteristics of raw materials such as density and bonding ability are other parameters that need to be considered. Roller gap can be set at a certain distance so that the pelletiser performance will optimal. Generally, gap 1 mm is the optimum condition, but the gap variation can be tried for the specific conditions of certain raw materials.





On hole die if we look deeper , it turns out is also not a form of cylindrical holes from the tip to the hilt . These conditions also deliberately designed so that the densification process can be optimal . If the shape of the tip is widened at the inlet of the die wear and missing then the quality of pellets produced will decline even not formed pellets . Comparison of length ( L ) and diameter ( D ) on the die hole according to the characteristics of raw materials will result in optimal performance . Selection of an appropriate metal material will make the pelleting process can be done economically . The quality of metal and metal working to die makes no domestic manufacturers are making in Indonesia. Another factor in has not many wood pellet producers in Indonesia may also be a factor in the reluctance of domestic manufacturers to make dies for wood / biomass pellets. But as the needs of wood pellet or pellet fuel increasingly skyrocketing then the above is possible.

Saturday, March 29, 2014

Global pellet market to reach $9 billion by 2020

The global market for pellets is expected to double in the next seven years, growing from a $4 billion market to $9 billion, Michele Rebiere with Viridis Energy Inc. told attendees at the Pellet Supply Chain Summit, March 24. The summit preceded the International Biomass Conference being held March 24-27 in Orlando, Fla.

Speaking in the closing panel of the day, Rebiere said the largest market, by far, is the European, with 20 million metrics tons (mmt) used in 2013 for both industrial power and residential heat. That is forecast to grow to 28 mmt by 2015 and 42 mmt by 2020. The North American market, is now at 4 mmt and forecast to be 5 mmt in 2015, but she added, are understated going out further. “I think the forecast in North American will increase substantially,” she said added, as the interest in cofiring with coal is likely to increase which the forecasts won’t include until projects are announced. The Asian market is expect to grow as well, from 1 mmt in 2013, to 3 mmt in 2015 and potentially 7 mmt by 2020. While the power market is the largest market contributor, the heating market is growing rapidly. Italy, in particular, garnered attention with the doubling of its demand in one year.

Seth Ginther, executive director of the U.S. Industrial Pellet Association, was a bit more conservative on his growth projections, pointing out that 2020 estimates range between 25 mmt and 70 mmt. “I think that 2013 was the year we’re beginning to see where the market is going to shake out. It’s going to be more like the 25 mmt level, but that still is going to be significant.”

In his discussion on the changes in the United Kingdom’s incentives, Ginther said it is important to note that the incentives for biomass conversions are aimed at helping  develop infrastructure. And, as the carrot is phased out, the stick – the price of carbon – is being increased, making it very expensive to burn coal. As a result, UK power producers are expected to continue to move towards biomass.

As a large UK buyer of North American pellets, Richard Peberdy, vice president of sustainability for Drax Biomass International, outlined his company’s commitment to biomass power and its interest in sustainability. The UK power producer has experimented with a number of biomass sources to supplement coal since 2008, making a commitment to pellets to provide a large portion of its biomass needs. It has two pellet facilities under construction in Mississippi and Louisiana and is building a port facility in Baton Rouge, La.
The first of three boiler conversions has been completed at Drax, with the second to be brought into service later this year and the third planned for 2015. Peberdy reported that Drax was pleased with the performance of its first biomass boiler conversion at the end of the first year of operations. “It’s outperformed our expectations in the first year at 39 to 40 percent efficiency on 100 percent biomass.” That is significant, he added, because UK sustainability reports projected biomass power would only reach 25 percent efficiencies, much lower than coal power’s average 35 percent efficiency.

 
Peberdy described Drax’s commitment to sustainability, pointing out that the company established its own sustainability goals even prior to the development of UK standards. The pressure for sustainability brings benefits, he said, by increasing investments in forests, in outreach to forest owners and in safer and better systems for making, handling and moving pellets.

Ben Conte, renewable energy sales manager for Bridgewell Renewables, filled out the panel at the summit on market energies by describing the work his company has done in marketing pellets in the EU. Much of the Bridgewell’s focus has been on meeting the high quality heating market, working to help its customers with their branding efforts. While Bridgewell is developing a brand to be able to meet spot markets, much of the work it’s done has been in seasonal 3-6 month contracts as well as long term contracts for one or two years. “The market is evolving,” he said. “The industrial and residential markets are linked in Europe and Asia,” he added, and are getting more sophisticated.

Other panels during the day included industry speakers addressing forestry ownership implications, sustainable forest management, pellet mill design considerations and infrastructure.

By Sue Retka Schill | March 24, 2014
Source : http://biomassmagazine.com/articles/10194/global-pellet-market-to-reach-9-billion-by-2020

Reject (Non-Standard) Coconut Fruit for Bioavtur / SAF Production

The international civil aviation organization (ICAO) has included non-standard coconuts on the ICAO positive list – ICAO document – ​​CORSIA...