Green Economy in the Cement Industry Part 4

 

The cement plants apart from being an industry that utilizes or processes waste such as slag and fly ash so that a circular economy pattern is formed, is also an industry that destroys waste by using it as fuel. RDF (Refuse Derived Fuel) from municipal solid waste (MSW) is an alternative energy source that is widely used by the cement industry, especially in the manufacture of clinker. In addition to helping overcome environmental problems in the form of environmental pollution from city waste, the use of RDF  also helps reduce carbon emissions or is part of the effort to decarbonize. Related to addressing environmental problems, alternative fuels such as used tires which are chopped into tire chips and plastic are also often used. In addition to these alternative fuels, biomass waste such as agricultural waste and livestock waste are also being used. The biomass waste is 100% renewable fuel, so it is more compatible and environmentally friendly. The use of agricultural waste such as rice husk and camel manure is an example of the use of this biomass waste, for more details, read here.

By operating at high temperatures, the cement plant can function as an effective waste destroyer. In this regard, a DRE (Destruction Removal Efficiency) test is required which must meet a very high score or nearly 100% (99.9999%) to be able to carry out the waste destruction activity. The failure to reach this value is due to the insufficiently high temperature, so the consequence is that not all facilities in the cement plant are able to destroy or burn the waste, only burners in kilns that operate above 1200 degrees Celsius can do it, which technically is waste or alternative fuel also has its own feeding point.

Apart from the power failure, cement plant operations can stop due to blocking. The blocking clogs the cyclone on the preheater and calciner. The main cause of blocking occurs is due to the sulfur content, especially from coal and petcoke or alternative fuels that have a high sulfur content such as tires (tyre chips, the sulfur then reacts with the alkali to form compounds that easily stick to the walls of the cyclone or even the kiln. This means that the percentage of sulfur needs to be limited. And the second cause of blocking is chlorine, which also reacts with alkali so it easily sticks to the walls of the equipment, but the difference is blocking because chlorine occurs at a lower temperature, so it sticks to the top of the cyclone. This means that the percentage of chlorine also needs to be limited.

Based on the conditions mentioned above, the use of alternative fuels, especially from renewable materials, is important, moreover, renewable fuels such as biomass have very low sulfur content, as well as chlorine, but certain alternative fuels must be calculated carefully, especially sulfur and chlorine content. , so no blocking occurs. Meanwhile, fossil fuels such as coal and petcoke apart from being cons of decarbonization efforts also turn out to be the main cause of blocking. This means that the use of fossil fuels must be further reduced.