Biofuel or Electric Vehicle First?

The decarbonization trend continues and has penetrated almost all lines, including the transportation sector. In the transportation sector, there are 2 things that can be done, namely the use of fuel from renewable energy or biofuel and the use of emission-free vehicles such as electric vehicles. In vehicles with 100% renewable energy or biofuel, the emissions produced are carbon neutral (even though the emissions contain CO2) while electric vehicles produce no emissions at all because there is no combustion process in the operation of the electric vehicle.

Currently, the majority of vehicles are vehicles with internal combustion engine technology, so they use fuel for their operations and the most widely used fuel is fossil fuel, especially in liquid form or liquid fuel. To achieve carbon neutral conditions, this fuel must be replaced with 100% biofuel. But currently, even though the use of biofuel has been carried out, the portion is not yet 100%. Indeed, technically there are restrictions on the use of biofuel so that it cannot be 100% like bioethanol, so this is also a concern. However, of course efforts to use 100% biofuel will also be the main target, apart from the emissions factor to achieve carbon neutral conditions, internal combustion engine technology is also the majority so it only needs minor modifications or even no modifications at all.

Another fact is that currently most electric vehicles still use electrical energy sources from fossil fuel power plants, especially coal. Even though these electric vehicles are non-emissions, basically the energy source is fossil energy, only the locations are far apart. Electric cars as a new product are also generally more expensive, even double or more than cars in general. This condition also affects the amount of use of the cars or electric vehicles themselves.

Indonesia as a tropical country has enormous potential as a biofuel producer because various plants or trees can grow well. Even though palm oil is currently the largest vegetable oil producing crop and Indonesia is ranked first in the world with an area of palm oil plantations reaching around 15 million hectares, the oil from palm oil competes with edible oil and the maintenance costs are high. not cheap. Meanwhile, vegetable oil from energy trees such as nyamplung (calophyllum inophyllum), apart from its oil productivity, is not inferior to palm oil, and the oil does not compete with edible oil, read more details here. Apart from that, the nyamplung tree, which grows well in areas near the coast, also provides its own advantages, namely because Indonesia has the second longest coastline in the world after Canada, namely 99,093 km and the nyamplung tree is also a multi-purpose tree. Meanwhile, biofuel from biomass waste can also be done, but because production costs are still expensive, it still requires a number of stages for implementation.

Under these conditions, the development of biofuel, especially from trees such as nyamplung, should be prioritized. Meanwhile, even though electric vehicles are emission free, their electricity source still uses fossil fuels. Efforts to reduce fossil fuels in power plants by cofiring have been carried out but the portion is still very small, so the climate benefits are not yet significant. If the source of electrical energy can be 100% renewable energy, then the use of electric vehicles can also be said to be like the use of 100% biofuel in internal combustion engines.

2nd Generation Biofuel with Biodiesel Production from Calophyllum Inophyllum and the Like

Biodiesel production from CPO is a 1st generation biofuel where the raw material competes with food products, which of course is not good. Biodiesel production from oils that do not compete with food products will be much better. The image of producers and even their country will also be improved if the program can be carried out on a massive scale. There are a number of trees that produce oil for biodiesel production. The selectivity of plant types related to productivity, climatic conditions and so on is certainly a serious consideration if production is on an industrial scale. Nyamplung oil (calophyllum inophyllum oil) is one of the best solutions because apart from high oil productivity, the productive period is long, and the logs after the productive period are also economical or have high selling value.

The productivity of calophyllum inophyllum oil competes with palm oil, whose productivity is around 6 tons/hectare/year, but caring for calophyllum inophyllum trees is easier and cheaper. Meanwhile, jathropha has lower productivity so it is less attractive and profitable to develop. Calophyllum inophyllum trees that grow well in the lowlands or on the coast will be very suitable for Indonesia as an archipelagic country. Indonesia has a coastline of 99,093 km or the second longest in the world after Canada. And it would be even better if the calophyllum inophyllum plantations on the coast also coincided with coconut planting. Indonesia is famous for its land of coconut islands, which generally grow well in coastal areas. Coconut trees also have many benefits from almost all their parts. If this happens, optimization of renewable energy production, namely biofuel in the form of biodiesel from calophyllum inophyllum oil and food products, especially those based on coconuts.

The transportation sector itself contributes 14% of CO2 emissions globally or 27% in Indonesia. Biodiesel produced by transesterfication reaction (C6-C22 chain) has very similar properties to diesel oil so it can be used 100% in diesel engines without the need for modification or mixing/blending with certain portions. Biodiesel contains 10% oxygen and zero sulfur, which makes engine combustion more complete and efficient. Liquid fuel also has its own advantages over gas fuel, including easy use and storage, and most existing vehicles use liquid fuel, so they can be used straight away. The development of biofuel as a carbon neutral fuel needs to be prioritized as part of decarbonization, especially for 2nd Generation Biofuel because it does not conflict or compete with food.

For 2nd generation biofuel from biomass or lignocelullosic biomass (such as wood waste), biodiesel production is still high cost. There are two process routes for biodiesel production from lignocelullosic biomass, namely gasification for syngas production followed by the Fischer-Tropsch (FT) process and fast pyrolysis for biooil production followed by hydrotreating and catalytic cracking processes. This is what makes biodiesel production in this way not possible even though it is technically possible. The raw materials for lignocellulosic biomass are much cheaper because they are generally categorized as biomass waste. However, the complexity of the production process makes production costs expensive, so it is not yet an option.

Meanwhile, for 3rd generation biofuel, namely from microalgae, even though the potential is huge, the productivity can even be more than 16 times the productivity of palm oil or calophyllum inophyllum oil (6 tons/hectare/year for palm oil and calophyllum inophyllum, while oil from microalgae reaches 100 tons/hectare/year ) but it seems that it still takes time to enter the commercialization stage. Problems related to cultivation, harvesting and oil extraction also still require extensive research. By producing biodiesel from calophyllum inophyllum oil, biodiesel production from CPO can be gradually reduced. The larger the calophyllum inophyllum plantation, the greater the biodiesel product produced, so that palm oil or CPO can be specialized as edible oil or specifically a food product. Likewise, it is hoped that oil from coconut will increase along with the growth and development of biodiesel production from calophyllum inophyllum oil.

Calophyllum Tree and Coconut Tree

Calophyllum trees and coconut trees have something in common, namely that they can grow well in coastal areas, all parts of the tree can be used and bear fruit throughout the year. With the length of the coastline of Indonesia reaching 99,093 km, it is very potential to develop these two plants. The calophyllum tree has non-edible oil but its productivity is almost the same as palm oil or crude palm oil (CPO), so it is very potential for biodiesel production. Whereas palm oil trees are the largest producer of vegetable oil. Why not biodiesel production from Jatropha ? For more detailed answers, read here. Meanwhile, coconut trees which are well known as multi-benefit plants are certainly very strategic and have the potential to be developed, especially now that the coconut tree population continues to decline due to the lack of replanting of old coconut plantations. Unlike the calophyllum tree, all the results are not food products, many processed coconut products are in the form of food products. The need for processed coconut food products continues to increase along with the increasing population. Issues of food and energy can also be overcome at the same time with these two plants.

The productivity of calophyllum is around 30 years, while coconut is longer, reaching around 80 years. Calophyllum tree wood has a high economic value as well as coconut trees. When the productive period of the two plants continues to produce fruit and when productivity decreases or stops, the wood becomes the ultimate product of high economic value. When compared to palm oil trees when their productive age runs out, the wood or trunk in general is still a problem, not even a few are just left in the plantation because it is not economical to process further, more details can be read here. Meanwhile, other forestry woods usually take decades before they can be harvested and there are no other products besides the wood. Of course, this is quite economically difficult and sometimes even not feasible.

Photo is taken from here

Calophyllum trees and coconut trees are also easy and inexpensive to care for, unlike palm oil trees which require a lot of water and fertilizer. Both also support agroforestry on the coast, as well as being a wind breaker. This encourages faster economic growth in coastal areas, and even becomes a tourist destination. Furthermore, for agroforestry systems, one of them can be distinguished based on its function, namely into a production function and a protection function. Production functions such as food production, feed, fuel such as biodiesel, fiber, wood and others. Meanwhile, protection functions such as prevention from damage to environmental resources as well as maintenance of production system such as hedges, water retention, fire prevention, soil and water conservation. 

The choice of plant species is very important in making agroforestry patterns, because mistakes that occur will have a long and detrimental impact. Species that are suitable not only in terms of growth, economic value and adaptability to a particular environment, but also their ability to form an ideal growth structure when growing together with other species on the same land. The choice of this type is very dependent on the wishes of the land owner, the conditions of the place to grow, the economic value and the ease of cultivation.

Calophyllum Inophyllum Plantation Don't Lose With Palm Oil Plantation

Calophyllum inophyllum has high commercial value wood. Forests in Indonesia contain around 4000 species of trees, with 267 of them being traded. Wood from trees of the family Dipterocarpaceae is the most important group such as meranti, keruing, kapur and mersawa. In addition, a number of tree species are also quite important, namely koompasia, palaquium, dyera, callophyllum inophyllum, octomeles sumatrana and gonystylus bancanus (ramin). Callophyllum inophyllum wood is rather light to medium and soft, but dense, wrinkled, to the point of not being able to split. Callophyllum inophyllum wood has two colors, namely gray or pseudo-yellow and brick red with finer veins and straighter fibers. Callophyllum inophyllum wood is classified as durable class II and very durable in sea water. Callophyllum inophyllum wood including commercial wood is often used as boards, beams, poles, flooring, boats, canoes, crates and tables, shipbuilding, railway sleepers, household furniture and so on. Fishing communities on the coast usually use the wood to make boats.

Until now, the potential for callophyllum inophyllum in Indonesia is still not known with certainty, but from the interpretation of Landsat7 ETM satellite imagery in 2003 on all coasts in Indonesia it is estimated that the natural stands of callophyllum inophyllum reach a total area of 480,000 hectares and most of it (about 60%) is in forest areas. Callophyllum inophyllum stands generally grow in mixed forest types, in natural forests with types of ketapang, malapari, waru laut, keben, pandan laut and others. While in planted forests, callophyllum inophyllum grows with acacia, mahogany, eucalyptus, melinjo, jackfruit, duku, durian and others. Callophyllum inophyllum grows closest at a position of 50-1000 meters from the shoreline with very variable tree densities. Nyamplung tree height can reach 25 meters and a trunk diameter of 1.5 meters.

Calophyllum inophyllum oil production, especially for biofuel production, can be done while waiting for wood production. This biofuel production has even become the main activity of this callophyllum inophyllum cultivation because it can be done for decades until finally the productivity of plants decreases, trees are cut down and replaced by new plants. The yield of calophyllum inophyllum oil, which is almost the same as crude palm oil or CPO, which is 5 tons/hectare and does not compete with edible oil, makes calophyllum inophyllum oil very potential to be developed. Biodiesel from calophyllum inophyllum oil also provides an answer to the failure of the jatropha biodiesel program some time ago, for more details read here. With Indonesia's coastline reaching 99,093 km, the production of biofuel from calophyllum inophyllum will be very large as will wood and its processed products. If we compare it with palm oil plantation, when their productive period is over, logging and utilization of palm oil trunks cause many problems, even many are just left in the plantation. Leaving oil palm trunks in the plantation until they are rotten turns out to also cause its own problems, namely as a place for growing larvae that damage coconut trees, read in more detail here. This is of course very different from the calophyllum inophyllum tree, which when the tree is old, the quality of the wood gets better, as well as the selling price. 

In addition, various agroforestry practices can be carried out on the calophyllum inophyllum plantation because it can be mixed-culture and other functions as wind breaker so that other plants will also be protected. The practice of mixed plantation or mixed culture can hardly be done on palm oil plantations so that the output is only one kind, namely fresh fruit bunches (FFB). Meanwhile, with mixed plantations, the output can also vary from food crops such as fruits, tubers and so on. The maintenance costs, especially fertilization, are also very large in palm oil plantations and this is the highest cost component in palm oil plantation operations. To continue to maintain its level of performance, of course, the need for fertilizer for oil palm plantations is very large, while in calophyllum inophyllum plantations it is smaller. The need for water for palm oil plantations is also very large, while in calophyllum inophyllum plantations it can even remain productive on dry soils. 

Of course all efforts depend on the goals to be achieved. Likewise with this calophyllum inophyllum cultivation. In addition to having many advantages compared to palm oil plantations as described above, the calophyllum inophyllum tree also has a number of advantages compared to other wood-producing trees. For wood-producing trees, such as teak, it takes a minimum of 20 years and during that time there is almost no income, so it is economically difficult. While in calophyllum inophyllum seeds are produced throughout the year as the raw material for the biofuel. Palm oil plantations are currently estimated to have reached around 15 million hectares with one of the oil being allocated for biofuel or especially biodiesel, so that if the calophyllum inophyllum plantation is developed, all biodiesel from calophyllum inophyllum oil can be made so that the palm oil plantation does not need to be expanded anymore. The existing calophyllum inophyllum plantations were developed and intensified so that they were sufficient for the required biodiesel production. In addition, the need for wood for various purposes can also be met from the calophyllum inophyllum plantation.