Green Economy in the Cement Industry

The trend of decarbonization, including the low carbon economy, has penetrated various sectors, including the cement industry. Cement is the most common human-made product in the world, consuming about 0.5 tons per person per year. The cement industry is also a significant contributor to greenhouse gases, reaching 21% (IPCC 2014), with these conditions making it one of the biggest contributors to climate change. And because the cement industry has a history as a major contributor to these greenhouse gas emissions, there are opportunities today to reduce emissions significantly through increasing efficiency and innovation in the industry.

Increasing energy efficiency in cement production will reduce the resulting carbon emissions. Even in the cement industry, the use of energy is also slowly starting to be used as renewable energy or alternative energy, including the use of RDF from municipal waste or household waste, which more or less reduces environmental pollution. While in the production aspect the use of additional materials originating from other industrial waste (circular economy) such as slag and fly ash or SCM (supplementary cementious materials) has also been widely used. The addition of these materials depends on the type of cement to be made and aims to reduce the use of clinker because clinker production requires high costs and produces CO2 gas as a result of calcination. For example, the manufacture of slag cement produces 38% less CO2 emissions than the process for the production of portland cement because less limestone is burned for the production of slag cement than is required for Portland cement. In addition, a number of countries also support the production and use of slag cement in order to support environmentally friendly products. The things above also indicate concern for the environment and sustainability is increasing.

In the cement industry, about 50% of emissions come from the calcination process itself, 40% from fuel for heating the kiln, and the remaining 10% from grinding and transport. Inside the calciner, a calcination process occurs, namely the decomposition of CaCO3 into CaO and CO2 and a little MgCO3 into MgO and CO2. Because the calcination reaction is endothermic, high heat is required, so it is equipped with a burner for burning coal utilizing tertiary air from the cooler and hot gas from the kiln. The release of CO2 due to the reaction in the calciner is a crucial environmental issue in the cement industry, the volume of CO2 gas from calcination is much greater than CO2 from burning fuel (coal) or 50% to 40%.

Various types of cement with different qualities often require specific SCM qualities as well. Under these conditions the review is not only general specifications but down to the chemistry of the material. For example slag from a steel plant or Granulated Blast Furnace Slag (GBFS) with a certain chemical content or fly ash but with a low alkaline content or slag from a nickel smelter not suitable for certain types of cement and so on. To obtain specific SCM such as slag and fly ash is closely related to the particular source of slag and fly ash, although in some cases it is possible to add certain materials to obtain the desired chemical composition.

And in the cement industry, emissions are not easily reduced. Emissions from processes cannot be reduced by optimizing or using only renewable energy or alternative energy. In the cement industry, when following the scenarios developed by the International Energy Agency (IEA) or the Intergovernmental Panel on Climate Change (IPCC), it is clear that to reach the limit of 2 C or even 1.5 C, cabon capture and storage / carbon capture and utilization (CCS / CCU) is needed. However, more is needed if the industry is to meet the ambitious goals set by the Paris agreement. The cement industry is particularly challenged by this target because carbon is generated by the energy used in the process and the calcination process itself. Even if energy-based emissions could be eliminated by switching to carbon-neutral fuels, those calcination process emissions would still be present and would require a carbon capture unit (CCS/CCU).

Europe has become a research center for carbon capture and storage (CCS) and carbon capture and utilization (CCU). From a number of carbon capture technologies, amine-based absorption (organic compounds and functional groups whose contents consist of lone-paired nitrogen atoms) is the most advanced carbon capture technology and has been implemented on a commercial scale. Carbon capture technology seems to play an important role in fighting climate change, especially in the cement industry.