Langsung ke konten utama

The Fastest Route For The Wood Pellets Production


Raw material particle size and moisture content of woody biomass that meet for specific technical requirements as long as adequate quantity then can be directly processed into wood pellets with pelletiser. Stages such as debarking, size reduction, and drying become no need to be done with the raw material in these conditions. The shorter route in the process so it will be more economical production processes are carried out. This is the ideal choice that be searched by all manufacturers of wood pellet. Ideal conditions are not plentiful but can be met in some industries.


Waste wood shavings (planers) due to the small its particle size  and already dried (MC~10%) generally can be directly processed into the pelletiser for the production of wood pellets. Just an additional equipment, that is hopper as a temporary reservoir is usually required before pelletiser for maintaining the stability of the supply of raw materials to the pelletiser continuously. The availability and sustainability of such raw materials would become one of the key success factors for the production of wood pellets. The dried raw material but if the raw material size is still quite large such as wood chips can not be directly fed into the pelletiser for wood pellets.

Komentar

Postingan populer dari blog ini

Carbon Positive, Carbon Carbon Neutral or Negative?

Greenhouse gases from burning fossilfuels have caused the Earth's temperature to rise. Increasing the temperature of the earth or global warming causing numerous disasters due to climate change in a number of places on earth. When greenhouse gases not controlled then the result of damage to the environment of the earth will be more severe. Therefore, efforts were made to reduce greenhouse gases as the cause of environmental problems. In general, there are four common scenarios to prevent the global warming effect of CO2 in the atmosphere gradually, namely: 1.increasing the efficiency so the fossil fuel consumption decreases, 2.mix of renewable fuels with fossil fuels so that fossil fuel consumption has also decreased, 3.substitution of fossil fuels with renewable fuels 4.and the absorption of CO2 in the atmosphere so that the concentration of greenhouse gases can be reduced. Here are some basic terms related to the above problems. Based on the origin and the effect that CO2 in the atmo…

10 Advantages By Making Energy Plantations for Wood Pellet Production

Assuredness of supply of raw materials is one of the key factors of business success in the wood pellets. There are two ways to obtain raw materials commonly done today: a. Buying from the owner of source of raw materials. b. Producing its own the availability of raw materials. While the 3rd way and there is still few for business owners make wood pellets is by mix way, which is partly provide by their own of raw materials and some rest buy from the other source of raw materials.
While examining at the types of biomass raw materials there are two kinds, namely : a. Woody biomass b. Non-wood biomass such as agricultural wastes (empty fruit bunches of palm oil trees, corn cobs, rice husks and so on). Currently woody biomass remains a priority to be products of wood pellets as a number of advantages over non-wood biomass which is generally an agricultural wastes, are included in the category of biomass pellets or agri-waste pellets. The comparison between wood pellet and biomass pellet …

Wood Pellet, PKS and Biomass Power Plant Market in Japan