Langsung ke konten utama

Potential Mapping the Wood Biomass To Energy

When the need for renewable energy from wood biomass greater, then at a certain level of wood biomass derived from wastes sawmills, or industries wood processing and so be insufficient so that it is necessary other sources are able to fulfill this purpose. Energy plantation or forest by type of short rotation coppice or SRC is the best scenario for the purpose. While this is still very much forest in Indonesia is available when used for the manufacture of energy forests or plantations, such as in the schematic below.

Detailed mapping to identify a variety of things that needed to be urgently needed because it will be linked to the size of the investment for the manufacture of energy forests or plantations. Remote sensing via satellite, aircraft, hot air balloons and the like is one of the stages to get the detailed mapping. The location of the energy forest or plantations had previously been determined, and the remote sensing of the various more detailed information will be sought, such as boundaries, topography, plant species that are already on location, age of the plant, plant height, and the type of soil. Imagery or aerial photography from remote sensing are usually seen only difference in color and form will then be translated to be processed, analyzed and obtained information as desired.

 Further field surveys in the region also needs to be done to improve the accuracy of the information of the previous stages. Field surveys are usually conducted by several teams to make the plot area-an area in a specific area which used as a sample and analyzed to find the information needed. Particular method is also used to determine the location of the plot and the amount, so the more the plot as the samples taken in the area it will be more accurate mapping information.

Furthermore, after the whole information has been obtained then the decision will be made soon. Wood pellets are a form of biomass energy that is very popular for the international market either for electricity or heat generation sector. Increasingly needs wood pellets are expected to be increased, or 2024 global production of wood pellets will be 50 million tons. Old plants in the energy forests or plantations location can also be used for the production of wood pellets if the quality and quantity according to the raw material of wood pellets is approprit before eventually using wood biomass from the energy plantations or the forests.


Postingan populer dari blog ini

Carbon Positive, Carbon Carbon Neutral or Negative?

Greenhouse gases from burning fossilfuels have caused the Earth's temperature to rise. Increasing the temperature of the earth or global warming causing numerous disasters due to climate change in a number of places on earth. When greenhouse gases not controlled then the result of damage to the environment of the earth will be more severe. Therefore, efforts were made to reduce greenhouse gases as the cause of environmental problems. In general, there are four common scenarios to prevent the global warming effect of CO2 in the atmosphere gradually, namely: 1.increasing the efficiency so the fossil fuel consumption decreases, 2.mix of renewable fuels with fossil fuels so that fossil fuel consumption has also decreased, 3.substitution of fossil fuels with renewable fuels 4.and the absorption of CO2 in the atmosphere so that the concentration of greenhouse gases can be reduced. Here are some basic terms related to the above problems. Based on the origin and the effect that CO2 in the atmo…

10 Advantages By Making Energy Plantations for Wood Pellet Production

Assuredness of supply of raw materials is one of the key factors of business success in the wood pellets. There are two ways to obtain raw materials commonly done today: a. Buying from the owner of source of raw materials. b. Producing its own the availability of raw materials. While the 3rd way and there is still few for business owners make wood pellets is by mix way, which is partly provide by their own of raw materials and some rest buy from the other source of raw materials.
While examining at the types of biomass raw materials there are two kinds, namely : a. Woody biomass b. Non-wood biomass such as agricultural wastes (empty fruit bunches of palm oil trees, corn cobs, rice husks and so on). Currently woody biomass remains a priority to be products of wood pellets as a number of advantages over non-wood biomass which is generally an agricultural wastes, are included in the category of biomass pellets or agri-waste pellets. The comparison between wood pellet and biomass pellet …

Wood Pellet, PKS and Biomass Power Plant Market in Japan