Wednesday, July 16, 2025

Biochar for Biographite as a Key Component of Electric Vehicle Batteries

The use of fossil fuels makes the transportation sector contribute 24% of global CO2. With CO2 emissions from fossil fuel use estimated to reach 36.3 gigatonnes (36.3 billion metric tons) in 2024, the transportation sector contributes 8.71 gigatonnes (8.71 billion tons) of CO2. Efforts to reduce CO2 emissions from the transportation sector are carried out in two ways: the use of renewable energy and the use of electric vehicles. The use of electric vehicles must be accompanied by the provision of renewable energy sources. Do not just use electric vehicles, but the energy source still comes from fossil fuel sources. Biofuel is a renewable energy source for the transportation sector that can be used directly with minimal vehicle modifications or even without any engine modifications at all. The question of whether to prioritize electric vehicles first or the use of biofuels first can be read in more detail here.

Electric vehicles can indeed be a decarbonization solution in the transportation sector, with the aforementioned considerations. And it would certainly be even better if the production of these electric vehicles also used materials from renewable sources, such as graphite for batteries derived from biochar or components such as chassis, body, and other metal components from "green steel" or "low carbon steel." Regarding graphite from biochar or biographite, with an average of 70 kg per car required, with projections according to the International Energy Agency (IEA) that electric car production by 2030 (including buses, vans, and heavy trucks) reaching 145 million units, the need for biographite will reach more than 10 million tons. In fact, according to the Economist, in that year, graphite demand is expected to exceed supply by 2 million metric tons, thus threatening the steel and battery industries. This means graphite production needs to be increased, but of course, that production will be biographite for better environment aspect, not synthetic graphite derived from fossil fuels. Meanwhile, in Indonesia itself, the government is targeting 2 million electric cars and 13 million electric two-wheeled vehicles by 2030. The use of biographite is intended to replace graphite derived from fossil sources which is still commonly used and with China as the main producer (controlling more than 80% of global (synthetic) graphite production).

Furthermore, Indonesia is rich in nickel, with reserves reaching approximately 5.3 billion tons of ore, equivalent to approximately 55 million metric tons of nickel metal (East Asia Forum, 2024), and holds the world's largest reserves. Australia ranks second with approximately 24 million metric tons of nickel metal, while global nickel reserves are estimated at approximately 130 million metric tons. This should place Indonesia in a strategic position in the era of electric vehicle use. In 2023, Indonesia produced approximately 1.8 million metric tons of nickel, accounting for nearly half of total global production (Statista, 2023). Nickel helps increase the energy density and storage capacity of batteries, enabling electric cars to have a longer range. Each electric car battery is estimated to use 30 kg of nickel. With the International Energy Agency (IEA) projecting electric car production by 2030 to reach 145 million units, the need for nickel will reach nearly 4.5 million tons.

In addition to properly managed nickel mining for environmental sustainability, the country's natural resources, particularly nickel, should also be processed into finished products domestically. Exporting semi-finished products or even raw materials, which offer little added value and are less profitable, should be avoided. Furthermore, if all nickel were exported to China, the world's largest graphite producer, it would make China a major global producer of electric car batteries. With biographite production, Indonesia would become less dependent on imports, and downstream nickel processing would make its own electric battery production highly feasible, potentially even becoming a major player in the battery industry. Nickel is also used in the production of stainless steel, a widely used material. 

Palm Oil Mill Operation with Pyrolysis and Biogas Unit Integration for Zero Waste, Maximizing Profits and Sustainability

The goal of a palm oil mill to achieve zero waste, maximum profit, and sustainability can be achieved, among other things, through the integration of pyrolysis and biogas unit. This is because nearly all solid and liquid waste from the palm oil mill can be processed into products needed by the palm oil industry, both in the palm oil mill for CPO (crude palm oil) production and on the palm oil plantation for FFB production. With pyrolysis, solid waste is converted into biochar, producing excess energy in the form of syngas and biooil for boiler fuel. Biochar is first used to increase biogas production before being applied to plantation or agricultural land. 

The biogas product can also be used as fuel for palm oil mill boiler, along with syngas and biooil. This method allows 100% of the palm kernel shell (PKS) to be sold or even exported, thus providing additional profits for the palm oil industry. Currently, 30-50% of the palm kernel shell (PKS) is generally used for boiler fuel, mixed with mesocarp fiber, and the remainder is sold or exported. Biochar production with pyrolysis. The biogas product can also be used as fuel for palm oil mill boiler, along with syngas and biooil. This method allows 100% of the palm kernel shell (PKS) to be sold or even exported, thus providing additional profits for the palm oil industry. Currently, 30-50% of the palm kernel shell (PKS) is generally used for boiler fuel, mixed with mesocarp fiber, and the remainder is sold or exported. Biochar production by pyrolysis can utilize both coconut fiber (MF) and empty fruit bunches (EFB) of palm oil. The integration scheme is as follows:

 
The use of biochar on plantations and agricultural lands will save or reduce the use of chemical fertilizers. This is especially true for oil palm plantations, where the largest operational cost is the use of chemical fertilizers. Reducing chemical fertilizer use will result in savings in fertilizer costs. Furthermore, it will provide other environmental benefits, reducing environmental impacts by minimizing waste from excessive chemical fertilizer use. Biochar slow-releases chemical fertilizers, increasing fertilizer efficiency or Nutrient Use Efficiency (NUE). Furthermore, when combined with biochar and organic fertilizer from biogas residue, the slow-release capacity of chemical fertilizers is further enhanced, resulting in higher NUE. Furthermore, another pyrolysis byproduct, pyroligneous acid (PA), is also highly beneficial for palm oil plantations as a liquid organic fertilizer and biopesticide.

Another source of income is carbon credits, or BCR (biochar carbon removal). Furthermore, carbon credits are currently a strong motivator for producers to produce biochar. To obtain these credits, biochar producers must register with a carbon standards organization and follow their methodology. Some popular carbon standards organizations include Puro Earth, Verra, and CSI. Meanwhile, for biogas production, carbon credits can also be obtained through methane avoidance mechanisms. However, the price of biogas from methane avoidance is usually lower than carbon credits from carbon removal or carbon sequestration with biochar. However, both can be accumulated and yield greater profits.

The operational potential of palm oil mills with integrated pyrolysis and biogas units for zero waste, maximizing profits, and sustainability is enormous and is predicted to become a trend because financial returns align with environmental benefits. Furthermore, environmental and sustainability issues are currently a global concern. With approximately 17 million hectares of palm oil plantations and 5.5 million hectares in Malaysia, the potential for biomass waste, particularly EFB and mesocarp fiber for biochar production, and POME waste for biogas production, is abundant. Globally, palm oil plantations cover nearly 27 million hectares. By 2024, Indonesia will be the world's top CPO producer with 56%, followed by Malaysia with 26%, and Thailand with 5%. There are more than 1,000 palm oil mills in Indonesia and approximately 500 in Malaysia. 

Competing in Goodness in Lowering the Earth's Temperature

Competing to lower the global temperature is a good thing. Competing in good deeds is highly encouraged in Islam. The negative impacts of global warming can be felt on land and at sea, and therefore must be minimized. This is why various parties involved in this effort should collaborate and synergize to achieve this goal. The business aspect of this activity should be a secondary priority, so that a spirit of good deeds, collaboration, and synergy will be fostered. Technically, strategic sectors that are the main causes of global warming are an important priority to address, although other, more pressing matters must also take precedence.

There is an excess concentration of carbon (CO2) in the atmosphere that causes the earth's temperature to rise due to the greenhouse gas effect, but on the other hand there are billions of hectares of land on earth that need carbon in the form of biochar to increase soil fertility as well as to absorb CO2 in the atmosphere with carbon sequestration / carbon sink. If these two things can be synchronized, it will be an effective solution to reduce the earth's temperature. In 2024, CO2 emissions from fossil fuels were recorded at around 36.3 giga tons (36.3 billion metric tons) and the latest CO2 concentration according to the Mauna Loa observatory in Hawaii reached 429.25 ppm (on June 24, 2025). Meanwhile, on the land side, globally an estimated 1.66 billion hectares of land have been degraded due to human activities such as deforestation, overgrazing, mismanaged irrigation, and excessive use of chemicals. 

Biomass fuel, produced by producing wood chips and wood pellets, or biofuel, is a carbon-neutral renewable fuel or source, thus complementing biochar. Wood chips and wood pellets, or biofuel, do not increase CO2 emissions, and biochar absorbs CO2, acting as a carbon sink (carbon sequestration), or carbon-negative. 

Monday, July 14, 2025

Biochar and Biographite for Decarbonization in the Iron and Steel Industry

The decarbonization trend continues across all sectors, particularly strategic industries such as the energy industry, iron and steel industry, and transportation. These industries contribute significantly to CO2 emissions, which increase atmospheric concentrations (carbon positive). The energy industry, particularly power generation, contributes 27.45%, the steel industry 8%, and the transportation sector 24%. With an estimated total CO2 emissions from fossil fuels of 36.3 gigatonnes (36.3 billion metric tons) in 2024, the iron and steel industry's contribution is approximately 2.9 gigatonnes (2.9 billion metric tons).

In the steel industry, carbon neutral production will be achieved when iron and steel production in the industry uses 100% renewable energy. The use of electric arc furnaces (EAFs) can be done as long as the electricity is generated from renewable energy sources. However, the use of EAFs that still use electricity from fossil fuels can be a transition medium before 100% carbon neutral production because of its lower CO2 emissions compared to blast furnaces that use coke from coal. CO2 emissions from blast furnaces are around 2.33 tons for each ton of crude iron / pig iron, while with EAFs, they are only around 0.66 tons for each ton of crude steel. The raw material processed with EAFs is steel scrap, and approximately 80% of steel scrap is currently recycled with EAFs. Globally, steel production with EAFs reaches approximately 22%.

And the fact is that currently, to achieve this goal is still far because the construction of blast furnaces - basic oxygen furnaces (BF -BOF) is still being carried out a lot, which should be EAF (Electric Arc Furnace) or currently only about 30% of the global iron and steel industry uses this EAF. The construction of new blast furnaces is indeed tending to increase, in fact, by mid-2024, around 207 million tons per year of new production has been announced and around 100 million tons per year is under construction.

Nearly all CO2 emissions in the steel production sector come from blast furnaces (BF) for refining iron ore into crude iron or pig iron. The challenge is enormous: there are approximately 1,850 steel mills worldwide, with approximately 1,000 using blast furnaces, with pig iron production reaching approximately 1.5 billion tons per year. The International Energy Association (IEA) has even highlighted this critical issue in achieving the Paris Agreement's net-zero target by 2050. With an average blast furnace lifespan of 20 years, the iron and steel industry's efforts to achieve this target must be well-formulated and programmed. Failure to replace blast furnaces within the specified timeframe will jeopardize the 2050 net-zero emissions target.

This makes the use of charcoal to replace coal-based coke in blast furnaces crucial. Charcoal derived from biomass is a renewable, sustainable material used as a reducing agent or fuel in blast furnaces. The chemical reaction separates oxygen atoms from iron atoms, releasing CO2. This converts iron ore (Fe2O3) into crude (pig) iron. The difference is that because the carbon source as a reducing agent or fuel in blast furnaces comes from renewable and sustainable sources, this process is carbon neutral. Using coke from coal, which comes from fossil fuels, is carbon positive. Similarly, using natural gas as a reducing agent or fuel in blast furnaces, despite its lower carbon intensity, is still carbon positive. 

However, if hydrogen from renewable energy sources (green hydrogen) is used as a reductant in the blast furnace, it will not produce carbon emissions but will produce water vapor (H2O), thus it is also a carbon neutral process. However, this will still take a long time, predicted to take several decades to implement. To produce a carbon negative process, the iron and steel mills that are already operating carbon neutrally must be equipped with CCS (Carbon Capture and Storage) devices, which will certainly be the next step. Furthermore, the use of renewable energy as an EAF energy source is also becoming increasingly important and must be accelerated, which should also be in line with the use of bio-graphite in the EAF.

The use of EAF in iron and steel mills is estimated to reach 550 units worldwide with steel production reaching around 548 million tons or around 30% of the world's steel production which will reach around 1.8 billion tons in 2024. The use of EAF requires graphite electrodes and every ton of steel produced requires an average of 3 kg of graphite. The current source of graphite is almost all derived from fossil sources so it is a source of carbon emissions (carbon positive) and also currently around 80% of the world's graphite supply comes from China. With steel production from EAF of 548 million tons, the annual graphite demand reaches more than 1.6 million tons. Every ton of graphite production from fossil materials emits CO2 emissions of 17-40 tons.

This makes the use of biographite crucial because it is carbon-neutral, producing CO2 emissions. Biographite is produced from biochar, or charcoal, which undergoes a special purification process. The biochar is converted into high-purity graphite suitable for EAF electrodes. Biographite is used for its strength, density, and conductivity, not only because of the CO2 emissions mentioned above, but also because of its technical advantages. Naturally mined graphite cannot meet these technical specifications, while synthetic graphite from fossil fuels is not environmentally friendly and is highly dependent on imports. This is the driving force behind biographite production.

The demand for biochar or charcoal as a reducing agent in BF will be very large, while for biographite as an EAF electrode is not as large as in BF. This makes it crucial to obtain a source of biomass raw materials as a source of biochar or charcoal in sufficient volume, good quality, and sustainable. Similarly, in terms of biochar or charcoal production, which primarily uses pyrolysis/carbonization technology, it must also be able to produce products with adequate quality and quantity, sustainably, and with a production process that is high in productivity, efficient, and environmentally friendly. Biochar or charcoal with specifications of at least 85% fixed carbon and a minimum conversion (gravimetric yield) of 30% is the reference for selecting this pyrolysis technology. 

In addition to biomass waste groups such as forestry waste and plantation waste, energy plantations can also be specifically created for this purpose, for more details read here. These energy plantations must also be created according to the land allocation and area of ​​monoculture energy plantations in accordance with proper planning and procedures, as well as efficient and environmentally friendly pyrolysis / carbonization technology. Biomass sources as raw materials for charcoal / biochar can also be said to be sustainable if the harvested product is less or at most equal to the growth of the plantation's wood. This is to prevent what happened in Brazil, namely in the state of Minas Gerais. Due to the large area of ​​monoculture eucalyptus plantations whose wood products are mostly for charcoal production for iron and steel mills, this has caused various negative impacts on the environment. Brazil is the world's largest charcoal producer and produced 5.2 million tons in 2017, 90% of which was used by the iron and steel industry, with 80% of the charcoal produced from eucalyptus plantation wood.

Approximately 70% of Brazil's iron and steel production occurs in the state of Minas Gerais, and this sector is unique in that 34% of iron production uses charcoal, not mineral coke/coal, and coke is also widely used in steel production. Historically, this was due to a lack of mineral coke in Brazil, but abundant forests for coke production. Minas Gerais currently has nine steel mills and 41 iron plants producing 3.1 million tons of crude iron in 2018, approximately 50% of which was exported. In 2018, Brazil had 5.7 million hectares of eucalyptus plantations, and Minas Gerais continues to have the largest plantation area in the country, covering 24% (1.4 million hectares) of Brazil's eucalyptus. Iron and steel companies also have eucalyptus plantations in an effort to secure a supply of charcoak for their iron and steel mills. Indonesia also has vast land potential, reaching hundreds of millions of hectares for these energy plantations. 

Biochar for Biographite as a Key Component of Electric Vehicle Batteries

The use of fossil fuels makes the transportation sector contribute 24% of global CO2. With CO2 emissions from fossil fuel use estimated to r...