The Role of Biochar in Increasing Palm Oil Productivity, Among the Use of Superior Seeds and Replanting

Palm oil productivity continues to be pushed to its most optimal point. This is because it is to meet the increasing needs, especially the mandatory B-50 biodiesel program. Of course, efforts to optimize productivity are not easy and instant. Although the key points for its realization have also been mapped, namely by replanting old palm oils, using superior seeds and intensification, the practice also requires the right method or approach and takes time. Replanting old palm oils is still very slow and has many obstacles, while the use of superior seeds has received more attention and continues to be encouraged. The analogy of using superior seeds is like comparing local cattle and superior breeds. So no matter how well the Javanese cow is cared for, its weight will not match that of the Limousin cow. Likewise with palm oil seeds.

Land intensification efforts through optimizing inputs, technology and modern cultivation methods also still need to be developed. Meanwhile, extensification or land expansion should be avoided or slowed down as much as possible, for more details, read here. Biochar can have an important role in this area of ​​intensification. Apart from the application of biochar it will improve soil health, which is an important prerequisite for plants to be able to produce optimally, it is also very environmentally friendly because the raw material for biochar is from renewable sources, namely biomass and increases fertilization efficiency (NUE = Nutrient Use Efficiency). And even the application of biochar is also a climate solution, namely as carbon sequestration. Optimizing productivity can be done by applying biochar plus using superior seeds using modern and environmentally friendly agricultural methods. So basically optimization is a comprehensive and measurable effort.

Indonesia contributes 25% to the world's vegetable oil supply, making it a key actor in the stability of the world's vegetable oil supply. With this position, any changes in production, export policies and Indonesia's domestic dynamics will directly impact prices and international market balance. Indonesia is currently the largest or number one producer of palm oil in the world, but it is not the best or most productive because its productivity is not yet optimal. Compared to neighboring countries, namely Malaysia, it is still inferior and slightly superior to Thailand, even though geographical factors, namely the climate in Indonesia, are much more supportive. Currently, Indonesia's CPO productivity is around 3.3 tons/hectare, while Malaysia's is around 3.8 tons/hectare, while Thailand's is around 3 tons/hectare.

Yield gap, namely the difference or gap between actual production and maximum production potential, is sometimes quite large. Several main factors that trigger yield gaps include non-optimal environmental factors such as drought conditions, to errors in cultivation practices such as errors in land clearing and planting, as well as inaccuracies in diagnosis and fertilizer recommendations. This yield gap must be minimized so that palm oil productivity can be maximized.

Sometimes the role of biochar cannot be found or seen directly in various efforts to increase palm oil productivity, but the application of biochar is very much in line with this goal. For example, the success of an palm oil replanting program depends, among other things, on the quality of seeds, fertilization, plant population and soil health. Soil health and fertilization factors can be closely related to biochar. And related to biofungicides to treat ganoderma fungus disorders, biochar can be used as a carrier formulated with other elements such as humus, amino acids, humates, hormones and so on. And because the only effective way to control the ganoderma fungus is to introduce its natural enemies in the form of biofungicides based on Trichoderma spp and arbuscular mycorrhizal fungi into the soil. However, there are still many parties who do not have adequate knowledge regarding the application of biochar.

Apart from boosting production, implementing best management practices is also important to meet sustainability standards amidst increasing pressure from environmental issues. And the application of biochar is very much in line with that point. In fact, regarding low carbon palm oil technology in the application of biochar, it is very relevant to the CECC (Controlled Emission Composting Chamber) and for more details on the application of biochar for composting, read here. Meanwhile, the trend of fertilization in palm oil plantations with the application of slow release fertilizer is also very relevant to biochar, for more details, read here. 

Slowing Palm Oil Land Expansion: Replanting or Biochar ?

The reckless expansion of palm oi plantations is definitely offside sustainability. Instead of palm oil being a blessing due to their highest productivity among other vegetable oil sources (soybeans, sunflowers, rapeseed, coconuts, etc.), growing only in tropical regions and contributing 40% of the global vegetable oil supply, they have instead become a natural disaster. The cost of this disaster is no small matter, costing thousands of lives, in addition to other material losses. This issue was particularly highlighted during the recent floods in Sumatra. Are the profits from palm oil worth the loss of life?

Clearing tens or even hundreds of thousands of hectares of oil palm plantations produces valuable timber. It's even possible to generate substantial profits from land clearing alone, even though palm oil plantations and production haven't even begun. This is what drives entrepreneurs to flock to this plantation sector, driven by the sole goal of maximizing profits without considering their own needs, resulting in widespread disasters. Furthermore, the implementation of mandatory B-40 or even B-50 biodiesel, currently being discussed, will undoubtedly create a new market for palm oil/CPO, much easier and more flexible than exporting to Europe, which is subject to the European Union Deforestation Regulation (EUDR), or to the US, which faces high tariffs.

Moreover, it has already been established that palm oil/CPO consumption for biodiesel has exceeded food demand. The mandatory implementation of the B-50 program also requires a 20% increase in CPO production capacity, or 60 million tons per year. The most profitable and fastest way to do this is through extensive deforestation, as the timber from cleared forests can be sold directly.

When the goal is to increase palm oil production gradually, safely, in a planned, and sustainable manner, adequate consideration is required, not blindly and recklessly clearing forest areas (deforestation) under the guise of land conversion. Besides the use of superior seeds, there are at least two ways to increase palm oil productivity: replanting and biochar application (part of land intensification).

According to Joko Supriyono, former chairman of GAPKI (Indonesian Palm Oil Producers Association) for the 2015-2018 and 2018-2023 periods, in his book "Is Indonesian Palm Oil Still Successful?", it is stated that if replanting of palm oil in Indonesia successfully reaches 300 thousand hectares per year, it is estimated that CPO and CPKO production in 2045 will reach 80 million tons. While currently CPO and CPKO production is around 55 million tons. And with the use of biochar, palm oil productivity will increase by an average of 30% in 5-10 years, meaning that by 2035 CPO and CPKO production will reach 71.5 million tons. Moreover, if the two methods are combined, the results should be even better.

Indonesia's current CPO production reaches approximately 50 million tons/year, covering a land area of ​​16.8 million hectares with an average CPO production of 3.55 tons/ha per hectare, or 3.55 million tons per million hectares. If biochar is used and productivity increases by 30%, this means an increase of 15 million tons of CPO (a total of 65 million tons of CPO/year) and this saves approximately 4.2 million hectares of land, or the use of biochar will slow down forest clearing for palm oil plantations. The application of biochar with compost will improve the quality of the compost to become premium compost. For more details, read here. This allows the palm oil industry to operate by utilizing all its biomass waste.

The replanting movement of palm oil plantations must be encouraged to continuously increase palm oil production. The problem of biomass waste from palm oil trees, which cover thousands of hectares, also poses a challenge. With such a large volume of old palm oil trees, utilizing them for value-added products is crucial. With an average hectare of palm oil plantations consisting of 125 trees, each tree having an average dry weight of 0.4 tons, this yields 50 tons of dry weight of biomass per hectare. For an area of ​​10,000 hectares, this yields 0.5 million tons of dry weight, and for an area of ​​100,000 hectares, this translates to 5 million tons of dry weight. An optimistic estimate suggests that Indonesia could achieve 5% replanting (very optimistic) or 820,000 hectares, which would yield 41 million tons of dry weight of biomass per year. Similarly, Malaysia, with 5% replanting or 285,000 hectares, would produce 14.25 million tons of dry weight per year.

Business readiness factors, both technologically and in terms of the market or user base, need to be carefully assessed. With such a large volume, biomass processing plants or industries can be established and operate optimally without worrying about raw material shortages. Products such as pellets, briquettes, biochar, and other bioproducts, such as other biocarbons, biomaterials, biofuels, and biochemicals, are also possible from this old palm oil trunk biomass waste. Old, dead oil palm trunks, often left unattended on land, should be utilized to produce these useful, value-added products. For more details on utilizing trunk waste for fuel pellet production (OPT Pellets), please read here. 

Biochar and Premium Compost Production from Organic Waste Processing

Biochar and compost production both use organic materials. The difference lies in their compatibility level. Wet, nutrient-rich organic materials with little lignin are more suitable for compost production. Dry, lignin-rich organic materials are more suitable for biochar production. Therefore, sorting these organic materials is necessary to achieve optimal results. With organic waste comprising up to 60% of municipal waste, the raw material requirements for both biochar and compost production are estimated to be substantial.

Biochar production is a thermal process, while compost production is a biological process. A biochar production unit, a pyrolysis unit, can be installed adjacent to and integrated with a compost production unit at municipal waste treatment facilities and similar facilities. The biochar product is then used to produce compost, improving the quality of the compost to premium compost and accelerating composting times. For more details, read here. Premium compost can also be sold at a higher price commensurate with its quality. Excess energy from biochar production or pyrolysis operations can be utilized in the waste processing of RDF fractions or others. 

The production potential of this premium compost is enormous. This makes it suitable for use on critical land from post-mining reclamation, which covers millions of hectares, or even hundreds of millions of hectares of degraded drylands. When premium compost is applied to unproductive or less productive land, it becomes fertile. For example, revegetation of post-mining reclaimed land will yield a variety of agricultural or plantation products that are economically, environmentally, and socially beneficial. Biochar, with its high carbon content, will persist in the soil for hundreds of years and, as a carbon sequestration measure, can be offset by earning carbon credits. 

Compost Production with Biochar to Improve Compost Product Quality and Business Profit

Although compost and biochar production both utilize and recycle organic waste, there are several differences: compost production through aerobic fermentation is a biological process, while biochar production through pyrolysis is a thermal process. Furthermore, regarding raw materials, ideal compost production requires a moisture content of 60–70%, high nutrient content, and low lignin content, such as food waste and animal manure. Conversely, ideal biochar production requires a moisture content of 10–20% and a high lignin content, such as woody biomass.

Recent research suggests that adding biochar to the composting process accelerates composting, reduces greenhouse gas emissions such as methane (CH4) and nitrous oxide (N2O), reduces ammonia (NH3) loss, increases aeration and reduces compost density, and reduces odor. The biochar itself is not damaged or decomposed during the composting process but enriches it with various nutrients.

To achieve optimal results, the biochar dosage must be appropriate to the amount of organic matter used in the compost. Using too much biochar will disrupt the composting biodegradation process, and using too little biochar will diminish the positive effects mentioned above. With the appropriate dosage, biochar can accelerate the composting process. This is because it increases the homogeneity and structure of the mixture and stimulates microbial activity in the composting process.

This increased microbial activity will increase the temperature and speed up the composting process. Several studies have shown that adding 5% to 10% of the biochar volume at the start of composting can speed up the composting process by 20%. While the average compost production time is 2 months (9 weeks), adding biochar at the above dosage can speed up the composting process by 20%, or approximately 1.6 months (7 weeks). With the shorter production time and better compost quality, the added biochar can lead to a higher selling price, potentially equivalent to premium compost. This can offset the cost of adding biochar to the compost production process.

The pores in biochar reduce the bulk density of the compost and aid aeration during composting. For nitrogen-rich compost materials such as livestock manure, adding biochar can reduce N loss during composting, particularly NH3. The unpleasant odor is caused by the release of NH3 during composting, and for this reason, many composting facility developments are rejected by local residents. In a study, adding 20% ​​biochar (mass basis) to poultry litter reduced NH3 concentrations in gas emissions by 64% and N loss by 52% without negatively impacting the composting process.

When used, compost decomposes, with nutrients absorbed by plants, while biochar remains in the soil for centuries. This makes biochar a long-term solution for improving soil quality. Using biochar in compost offers both short-term and long-term benefits. The short-term benefit is as an organic fertilizer, while the long-term benefit is improving or stabilizing soil quality and sequestering carbon. CO2 absorbed through photosynthesis becomes biomass, or organic matter, as the raw material for biochar, and the carbon in biochar remains stable for hundreds of years, and is not released into the atmosphere during this time.

There is no data yet showing the calculated amount of compost production in Indonesia per year. However, the potential for compost production from domestic organic waste is very large, reaching around 60% of the total national waste generation which reaches more than 60 million tons per year or more than 36 million tons of organic waste as raw material for compost. There are a number of parties carrying out compost production in various regions in Indonesia, both government and private parties who contribute to compost production, with varying production capacities. With the very abundant organic raw materials (more than 36 million tons/year), the production of biochar-enriched compost can be carried out so as to maximize the quality of compost and other benefits.

This can be achieved by building a biochar production unit or installing a pyrolysis unit at the organic waste source. Organic waste materials that are less suitable for composting can be used for biochar production. Several companies are already planning to do this. Read the related article here. 

Biochar for Palm Oil Nurseries Part 2

In 2024, Malaysia reported that replanting their palm oil plantations reached 114,000 hectares, or 2% of the country's total area, compared to the targeted 4% to 5%. Indonesia's replanting rate is estimated to be lower, but because Indonesia's palm oil plantations are much larger, approximately three times Malaysia's, the area is larger. This situation has led to a decline in palm oil production, as palm oil productivity begins to decline after 20 years and requires replacement or replanting after 25 years to maintain productivity. Replanting should be carried out periodically, with an area of approximately 5% of the total palm oil plantation area.

Palm oil rejuvenation (replanting) requires palm oil seedlings. If estimated current replanting of palm oil plantations in Indonesia is 300,000 hectares per year (or 1.8% of Indonesia's oil palm plantation area), then with an average oil palm plantation population of 125 trees per hectare, the need for palm oil seedlings reaches 37,500,000. And with 114,000 hectares in Malaysia, the need for palm oil seedlings will reach 14,250,000 seedlings. Producing quality palm oil trees, in addition to selecting superior varieties, also includes seedling production in palm oil nurseries. Biochar can be used effectively in palm oil nurseries, as it helps improve seedling growth and health.

Biochar, made from biomass, functions as a soil amendment, improving soil structure, water retention, and nutrient availability, while also providing a favorable environment for the growth of soil microorganisms. Biochar can be mixed directly into the growing medium during nursery cultivation, with the dosage adjusted to the type of growing medium and the plant's needs. Numerous studies have shown that applying biochar to palm oil nurseries can improve seedling growth, including plant height, stem diameter, leaf number, and root dry weight. By utilizing biochar, palm oil nurseries can become more efficient, productive, and environmentally friendly.

And because the planting medium for palm oil seedlings generally uses compost, if the compost is enriched with biochar or the composting process also uses biochar, the compost quality will be even better. The advantages of the composting process using biochar include improving compost quality, accelerating the composting process, reducing greenhouse gas emissions in the form of methane (CH4) and nitrogen oxide (N2O), reducing ammonia (NH3) loss, increasing aeration (bulking agent) in composting, and reducing odor. As for the biochar material itself, it will enrich the biochar with various nutrients and the biochar is not damaged or decomposed during the composting process. So by utilizing biochar in composting, we can process organic waste more effectively, produce high-quality organic fertilizer, and contribute to more sustainable agricultural practices. 

Biochar For Patchouli Plantation

Indonesia is famous for producing various essential oils, including patchouli oil, clove leaf oil and so on. The main use of essential oils is mainly for food, pharmaceuticals, fragrances (perfumes). The potential of this country to develop essential oils is very large due to climate factors, land area and soil fertility. World export-import statistics data show that consumption of essential oils and their derivatives has increased by around 10% from year to year. Of the 70 types of essential oils traded on the international market, citronella oil, patchouli, vetiver, ylang-ylang, cloves, pepper, and jasmine oils are supplied from Indonesia. Indonesia is the largest country in Southeast Asia producing essential oils and is among the top 10 in the world.

Patchouli production centers in Indonesia are in Bengkulu, West Sumatra, and Nangro Aceh Darussalam. The quality of Indonesian patchouli oil is known to be the best and controls 80-90% of the world's market share or the largest supplier of patchouli oil in the world. This patchouli oil comes from the distillation of dried leaves to extract the oil which is widely used in various industrial activities. Patchouli oil is used as a fixative or binder for other fragrance ingredients in perfume and cosmetic compositions. The area of patchouli planting reaches 21,716 ha spread across 11 provinces in Indonesia, and in 2008 about 2,500 tons of patchouli oil were produced.

Patchouli plants commonly cultivated in Indonesia are Aceh patchouli because the oil content is > 2% and the oil quality is patchouli alcohol (PA) > 30% higher than Java patchouli which has an oil content of <2%. Furthermore, with Aceh patchouli, there are three varieties of patchouli plants found in Aceh, namely Tapaktuan patchouli, Lhokseumawe patchouli, Sidikalang patchouli. The PA levels of the three varieties vary, namely: Tapaktuan (28.69-35.90%), Lhokseumawe (29.11-34.46%), and Sidikalang (30.21-35.20%).

Patchouli Oil Production in Sentra Province 2015-2020**)

One of the factors that support plant growth and optimal production is the availability of sufficient nutrients in the soil. The level of nutrient availability for patchouli plants must be optimal to obtain high growth and oil content. Patchouli is known to be very greedy for nutrients, especially nitrogen (N), phosphorus (P) and potassium (K). Patchouli plants are among those that require quite a lot of nutrients, so that production continues to run optimally, fertilizer application is carried out very seriously. This is so that the level of soil fertility must be maintained optimally if we expect optimal patchouli agricultural production. Therefore, in the shifting patchouli cultivation system, there will be a very rapid decrease in land fertility which will damage the land.

Patchouli can be cultivated on dry land, thus the development of patchouli plants is very relevant to the potential of dry land which is quite extensive in Indonesia compared to rice fields. In fact, dry land is the most widely distributed sub-optimal land, which is around 122.1 million ha consisting of 108.8 million ha of acidic dry land and 13.3 million ha of dry climate dry land. The development of patchouli plants has a dual purpose, in addition to increasing farmers' income, it also increases the productivity of dry land which is widely spread in Indonesia.

To improve land quality, namely by applying biochar. The application of biochar to agricultural land functions as a soil amendment that can improve the chemical properties of the soil (pH, cation exchange capacity, total N, and available P), the physical properties of the soil (bulk density, porosity and the ability of the soil to hold water). Improvement in the quality of the chemical and physical properties of the soil has an impact on the availability of nutrients and water through the ability of biochar to retain nutrients and water. Ultimately, the addition of biochar has implications for increasing the productivity of patchouli plants. In the future, it is hoped that with the application of biochar, more suboptimal and degraded lands which can be restored and plants productivity increased.

Optimizing the use of dry land for food crop cultivation needs to begin with land rehabilitation efforts so that plants can produce optimally. Soil amendments that are cheap, readily available and can last a long time in the soil are expected to be able to trigger the rate of increase in dry land productivity. The potential for agricultural waste to be converted into soil amendments (biochar) in Indonesia is quite large. Biochar applications have been proven to improve the quality of physical and chemical properties of the soil, as well as increase water availability. Crop productivity also increases in line with the recovery of land quality.

Biochar can also be added during composting so that more nitrogen (N) content can be absorbed in the biochar. The higher the nitrogen (N), the better the compost quality will be. Total N is one of the macro elements needed by plants in large quantities, accounting for 1.5% of the dry weight of the plant. Nitrogen is useful in the formation of protein, a component of plant chlorophyll, and if morphologically N plays a role in the formation of leaves and stems of plants or the vegetative formation of plants. Phosphorus is an absolute nutrient needed by plants after nitrogen. Symptoms of phosphorus (P) nutrient deficiency are seen as the color of the plant becomes dark green or purplish green which is then followed by older leaves turning purplish. The addition of biochar and compost, in addition to increasing the productivity of patchouli leaves, can even increase the yield of patchouli oil from an average of 2% to 4% and the patchouli alcohol content of patchouli oil from an average of 32% to 40%.       

Increasing Food Agriculture Productivity: Biochar Application or Forest Clearing for Food Estate?

Indonesia currently ranks 69th out of 113 countries in 2022 in food security and this is lower than Malaysia and Vietnam with indicator points below the global average. This condition is concerning considering that Indonesia was once self-sufficient in food before and even the price of rice in Indonesia is the most expensive in ASEAN. Efforts to maintain food productivity are indeed a challenge, let alone increasing it. Along with increasing population growth, the need for food automatically increases. The condition of declining food production and productivity is related to a number of factors including land conversion to non-agricultural land, and soil / land damage. A number of regulations have been made to stem the rate of decline in food productivity due to these two things.

Regarding land damage, repair efforts need to be made so that agricultural productivity increases. It is estimated that the area of ​​land damage that occurs is very large with a high level of severity. This requires gradual and sustainable repair efforts with various strategies including improving farming patterns and even a number of incentives. Only with these efforts can the agricultural sector as a source of food be repaired or if not, the damage to agricultural land will get worse so that repair efforts will be more difficult.

Biochar application or forest clearing for food estate ?
Biochar application will be able to repair damaged lands. In addition to being a slow-release fertilizer agent so that fertilizer use becomes efficient and does not pollute the environment, increasing soil pH, increasing soil organic carbon and increasing agricultural productivity, biochar will also help overcome the management of agricultural waste that has so far polluted the environment. The increase in agricultural productivity from the use of biochar is on average around 20%. If Indonesia's current rice production is around 31 million tons per year, then the application of biochar will increase total rice production to 37.2 million tons (an increase of 6.2 million tons). With an average rice production per hectare of 6 tons, the increase of 6.2 million tons is equivalent to increasing the area of ​​agricultural land by 1.03 million hectares. Even damaged land from post-mining can be reclaimed and rehabilitated with the application of biochar, with the land area also reaching millions of hectares. This is certainly better than clearing new forest land for food estates because of its environmental impact. 

As the human population grows, the need for food and energy will continue to increase. Indonesia's population in 2045 is estimated to reach 319 million people and the world's population in 2050 is approaching 10 billion people. The need and urgency of biochar to improve soil quality is increasing. Tens of millions of hectares of all Indonesian acidic soils, which are classified as dry land acidic soils, need to be improved with biochar. This means that the business potential reaches billions of dollars or trillions of rupiah. Meanwhile, rice imports in 2024 are targeted to reach 3.6 million tons (as a buffer), a large amount. With an annual rice requirement of around 31 million tons, the contribution of imported rice reaches more than 10%.

Biochar in addition to repairing soil damage so that it increases its fertility which ultimately increases agricultural productivity is also part of the climate solution, namely by means of carbon sequestration. Biochar applied to the soil will last hundreds or even thousands years, and does not decompose. This is another advantageous factor for biochar producers, namely getting carbon credits. The quality of biochar will determine the acquisition or price of the carbon credit, so that the raw materials of biochar and its production process are affected. The price of carbon credits is increasing so that it is increasingly attractive and also the carbon credit market continues to grow.

Damage to land or agricultural land that occurs is mostly caused by excessive use of chemical fertilizers. If the use of chemical fertilizers can be reduced in dosage or with sufficient use, there will be improvements in land quality. Even if chemical fertilizers are gradually reduced in dosage and organic fertilizers / compost are increasingly added so that in the end chemical fertilizers are not used at all, soil fertility will be optimal as well as agricultural productivity.

The photo from here

Of course, this requires time and continuous effort. Livestock must also be encouraged so that compost / organic fertilizer can also be produced sufficiently from the processing of livestock manure. Integrated farming with livestock is the best solution for improving agricultural land with biochar, especially increasing the efficiency of fertilization. If the above can be implemented properly, then forest clearing for food estate land can also be slowed down / held back by considering all aspects comprehensively so that it is not a short-term solution that tends to be forced, and rushed because of the regime's image efforts even at a cost of hundreds of trillions.

Projections for Indonesia's Future Waste Management: Production of RDF and Biochar Enriched Compost

Photo taken from here

The MSW problem is a concern in a number of areas currently. This is because MSW, apart from being a serious environmental problem, also has an impact on social problems. The public is starting to become more aware of this MSW problem, especially for urban communities who no longer have land to pile up or burn their MSW and what's more, final disposal sites are no longer able to accommodate the MSW produced by these communities. Flooding, groundwater pollution, air pollution are some of these environmental problems which, if not addressed, will cause a number of serious environmental problems. Public awareness regarding waste should be getting better day by day, and various efforts should be made to overcome it.

One of the composting unit in Indonesia

Currently the central government and regional governments are working hard to overcome the waste problem namely this MSW. Despite hard efforts, generally only a small portion of the MSW can be handled and most of it is still accumulating and accumulating so that it continues to pile up. An example is the current MSW problem in Jakarta, the capital of Indonesia namely with an average daily waste volume of 7,500 tons/day, only around 1,000 tons per day can be processed. With the RDF production unit at Bantar Gebang TPST, with raw materials of 2,000 tons of waste per day originating from 1,000 tons of new MSW and 1,000 tons of old waste (landfill mining), approximately 700 tons/day of RDF is produced. So with only 1,000 tons/day of new waste that can be processed, that means only 13% of the total daily waste volume. Meanwhile, conditions in a number of regions in Indonesia are also almost the same.

 

Future MSW processing must be able to process the 100% of MSW or have zero waste. Apart from that, the MSW processing product must also have useful and economic value. One of them is large capacity RDF and compost production. Almost all organic waste can be composted, while non-organic waste, especially plastic, can be made into RDF. Other waste such as iron, glass, ceramics and metals are separated first so that it does not interfere with the RDF and compost production process. RDF is commonly used as an alternative fuel, especially in cement plants. However, with high chlorine content, the use of RDF in cement plants needs to be limited.

Sometimes the distance between RDF production and the cement plant makes transportation costs expensive and RDF products become uncompetitive. This means that RDF needs to be compressed into RDF pellets. By increasing the density of RDF into pellets, apart from saving transportation costs, it will also make handling, storage and use easier. Meanwhile, biochar can be added to compost to improve its quality. Biochar is added during the composting process and later there will be more nutrients contained in the compost. Biochar with its micro pores will be used as a place to store these nutrients. Apart from that, biochar is used as a carbon sink / carbon sequestration and can survive in the soil for hundreds or even thousands of years. This also has the potential to provide additional income from carbon credits. Biochar production by pyrolysis will also produce heat energy which can be used for drying waste in RDF production and pyrolysis of organic materials.

Biochar to Increase the Porosity of Damaged and Marginal Soils

Basically, porous materials will have large surface areas. The more pores, the greater the surface area of the material. Efforts to increase pores or expand the surface can be done in many ways depending on the goal. The type of pores also affects the total surface area and also the use or application of the material. For example, materials that have more micropores will have a larger surface area and have different specific uses than materials that are dominant with medium pores (mesopores) or large pores (macropores). Designing a material so that it is micropore, mesopore or macropore dominant can be done, namely by selecting raw materials and process technology, for example biochar produced from pyrolysis will produce a larger surface area compared to the initial unprocessed biomass.

In land related to use for agriculture or plant cultivation, the aspect of soil porosity or pores is an important aspect. This is mainly related to nutrient and water retention as well as soil aeration. Expanding soil pores will be very useful for improving soil quality so as to support the success of agriculture or plant cultivation. Soil that has more pore space will be able to store large amounts of water and nutrients too. Soil that has a high number of small (micropore) and medium (mesopore) pores will tend to hold water and nutrients more strongly than soil that has many large pores (macropore). And if there is evaporation or use of water by plants or a leaching process occurs in nutrients, then the large pores (macropores) left behind by the water and nutrients will follow the medium (mesopore) and  micropore.

Providing organic material in the form of compost to the soil is generally used to form more micropore spaces. The more micropore spaces that are formed, the more moisture the soil will have. Soil organic matter has more pores than soil mineral particles, which means that the surface area for absorption is also greater. Providing organic material in the form of compost, apart from increasing the number of pores or soil porosity, also reduces the volume weight. This organic material or compost is a source of energy for soil microbial activity, reduces soil volume, improves soil structure, aeration and air binding capacity. Soil with high total pores, such as clay, tends to have a low volume weight, while soil with low total pores, such as sandy soil (coarse texture), tends to have a high volume weight.

Apart from increasing total pores, adding compost also increases soil pH, namely in sandy soil and acidic soil, including entisol, ultisol and andisol and is able to reduce soil exchangeable Al. The increase in pH is due to the process of breaking down the compost. The results of this overhaul will produce basic cations which can increase the pH or release basic cations from the compost into the soil so that the soil is saturated with basic cations. The weathering or decomposition process of the compost will release alkaline cations which cause the soil pH to increase.

Soil organic C will also increase with the addition of compost and total N (nitrogen). The more organic matter added to the soil, the greater the increase in organic C in the soil. Compost from animal waste has the lowest C/N ratio compared to compost from plants. Organic materials that have a high lignin content will inhibit the speed of N mineralization and the C/N ratio will be high. In fact, further decomposition of organic matter is characterized by a low C/N ratio. Meanwhile, a high C/N ratio indicates that decomposition has not yet continued or has just started. In this process there is a decrease in carbon / C and an increase in nitrogen / N.

The need for compost on marginal land such as sandy land is also much greater, reaching almost twice as much as on ordinary or standard land. Meanwhile, the need for chemical fertilizer on marginal land is usually less than on normal/standard land. Ideally, using compost at optimal doses will be able to increase plant productivity and preserve the environment.

Unlike compost which will completely decompose, as a soil amendment, biochar can last hundreds of years in the soil. Biochar, which has a large surface area, also has many micropores which increase soil porosity, like compost. Pyrolysis conditions are important in determining the quality of biochar besides the biochar raw material itself. In rough textured soils such as sandy land, biochar will improve water and nutrient retention because its micro pores slow down its release (slow velocity). The quality of biochar is directly proportional to the efficacy of biochar treatment. A number of parameters related to the application of biochar for soil improvement/treatment are also similar to compost, including: soil carbon content and mineralization, soil micro-structural & aggregation, bioavailable nitrogen, and microbial activity & diversity. Almost all biochar is not fertilizer like compost, read more details here, so inoculation (charging) of biochar before application can be done by filling the biochar pores with water containing specific chemical elements or microbes. This will produce rapid positive effects compared to biochar alone. Apart from that, biochar is also used to reduce carbon dioxide (CO2) in the atmosphere as carbon sequestration. This is very much in line with the current problems of climate change and global warming.

Biochar is a heterogeneous substance rich in aromatic carbon and minerals. Biochar is produced from the pyrolysis process (a process where organic material is decomposed at temperatures between 350 to 1000 C with well-controlled conditions of minimal or no oxygen and is widely used for soil amendment). The carbon content for biochar must be above 50%, whereas if pyrolysis products of organic material with a carbon content of less than 50% are not included in the biochar category but are referred to as pyrogenic carbonaceous material (PCM). The organic carbon content of pyrolyzed char fluctuates between the range of 5% and 95%, depending on the raw material and temperature. process used. For example, the carbon content from pyrolysis of chicken manure is around 25%, while from wood it is around 85% and bone is less than 10%. When using mineral-rich raw materials such as sewage sludge or animal waste, the pyrolysis products will contain high ash so that the total pores are smaller.

Apart from that, biochar must also have a molar ratio of H/Corg of less than 0.7 and a molar ratio of O/Corg must be less than 0.4. The molar ratio of H/Corg is an indicator of its degree of carbonization (pyrolysis) and is therefore closely related to the stability of biochar, which is one of the most important characteristics of biochar. This ratio fluctuates depending on the type of biomass used and the conditions of the production process. A ratio value that exceeds 0.7 indicates non-pyrolytic char or inadequate pyrolysis process conditions. Meanwhile, the O/Corg ratio is also used to differentiate it from other carbon products. Specific surface area is also a measure of the quality and characteristics of biochar, and also a control value for the pyrolysis method used. Although a surface area of less than 150 m2/gram can be used in certain cases, it is preferred or preferred if it is more than 150 m2/gram.

With the characteristics above, compost and biochar as well as chemical fertilizers can be used together, even in the composting process biochar can also be added to reduce N organic released into the atmosphere. Apart from increasing the number of micro pores in the soil or increasing the total pores, the nutrients from compost and chemical fertilizers will also be released more slowly (slow release). How slow release the fertilizer can be designed depends on needs, for more details you can read here. When biochar is used properly, it can maximize harvest productivity, improve soil fertility and minimize environmental impacts. Four things need to be considered when applying biochar, namely the right source of biochar, the right location (right place), the right dose (right rate) and the right time. Not all types of soil and plants will produce increased yields from biochar applications, so it is important to know what type of soil produces increased productivity. A soil map can help to identify soil types that have the potential to provide benefits or advantages from the application of biochar. Farmers can consult with agricultural consultants or professionals in the field to help with the selection and application of biochar. 

Fertilizer Savings in Palm Oil Plantations with Biochar and Compost from Biogas Waste

Although Indonesia is the largest CPO producer in the world with an area of ​​approximately 13 million hectares of palm oil plantations, but it is estimated that less than 10% have a biogas facility from POME (Palm oil mill effluent). Whereas by utilizing POME for biogas production, besides being able to be converted into electricity or heat, it also produces organic fertilizer in the form of compost and liquid organic fertilizer. The compost can be used as fertilizer in oil palm plantations, where the cost of fertilizer for palm oil operations is the highest cost component. It is estimated that every 10,000 hectares costs approximately Rp. 35.75 billion (around US$ 2.25 million) for fertilizer and for more details, you can read here. The use of compost will certainly reduce the need for fertilizer.

Palm oil utilization scheme for optimizing CPO production

Besides that, solid wastes such as palm oil empty fruit bunch, fiber and palm oil frond are also very potential for the production of energy (electricity and heat) and biochar. Energy production in the form of electricity and heat is by burning pyrolysis byproducts in the form of syngas and biooil into the furnace to heat the boiler. And because the syngas and liquid fuels used in the furnace, so that the combustion process is more perfect and clean emissions. Steam generated from the boiler will then drive the steam turbine and generator so as to produce electricity. Low pressure steam from steam turbine is then used for sterilization or boiling the fresh fruit bunches (FFB). While biochar will be used together with compost and chemical fertilizers to make fertilizer effective in the palm oil plantations so that it becomes a slow release fertilizer. Costs for fertilization are also expected to be significantly reduced, for example by up to 50% by this way. Although biochar is not a fertilizer, it has a function that makes fertilizer use effectively because it holds fertilizer nutrients from leaching, for example from rain water, also maintains moisture and so on.

PKS (palm kernel shell) can even be sold or exported. This is because previously or in general the palm kernel shells used to fuel boilers with fiber, have been substituted with products from the pyrolysis process namely syngas and biooil. The need for palm kernel shells for both the domestic / local and export markets continues to increase all the time. Palm kernel shells / PKS are environmentally friendly fuels because they come from biomass so they are carbon neutral fuels. The use of PKS as a fuel is widely used by a number of industries starting as a heat source for the drying process such as spray dryers in detergent and ceramic plants, boilers in food industries such as soy sauce factory, to power plants such as in Japan, can be read in more detail here. In the world of biomass fuel commodity trading, especially in the international market, PKS is the main competitor of wood pellets. Although the specifications are not much different, the price of PKS is also cheaper because it comes from palm oil mill waste and does not need complex processing units such as wood pellets. And basically with the scheme of utilizing palm oil mill wastes as above, it will maximize the profit from the palm oil mill or CPO mill.